Turkey
Egypt
Kuwait
Qatar
Saudi Arabia
South Africa
United Arab Emirates
How to disable Wi-Fi (NETGEAR)
This article will walk you through general instructions on how you can turn OFF the Wi-Fi on your NETGEAR® router.
Before you begin, make sure the computer you use is turned ON and connected to the Wi-Fi.
NOTE: Steps and instructions may vary depending on your router’s model.
Step 6:
The network should now appear as disconnected on your computer.
Before you begin, make sure the computer you use is turned ON and connected to the Wi-Fi.
NOTE: Steps and instructions may vary depending on your router’s model.
Step 1:
Launch a browser, enter "https://www.routerlogin.net" in the address bar to access the router’s configuration page then press [ENTER].
Launch a browser, enter "https://www.routerlogin.net" in the address bar to access the router’s configuration page then press [ENTER].
Step 2:
Enter the login credentials for your device.
Enter the login credentials for your device.
NOTE: The default username and password is admin.
Step 3:
Click on the ADVANCED tab.
Click on the ADVANCED tab.
Step 4:
Click on the Advanced Setup menu and then click Wireless Settings.
Click on the Advanced Setup menu and then click Wireless Settings.
Step 5:
Uncheck the Enable Wireless Router Radio for both 2.4 GHz and 5 GHz Wi-Fi.
Uncheck the Enable Wireless Router Radio for both 2.4 GHz and 5 GHz Wi-Fi.
Step 6:
Click on 
to save the settings.
to save the settings.The network should now appear as disconnected on your computer.
