text.skipToContent text.skipToNavigation

How to create a VLAN on the Linksys Business Gigabit VPN Routers, LRT214 and LRT224

The Linksys Business Gigabit VPN Routers, LRT214 and LRT224 support up to five (5) sets of Virtual Local Area Network (VLAN) which are used to divide networks into several segments.  This will enable administrators to manage networks easily and reduce the broadcast domain in order to enhance the network performance and security through isolation.

Follow the instructions below on how to create a VLAN on a Linksys Business Gigabit VPN Router.

 
Step 1:
Access the router's web-based setup page.  To learn how, click here.

Step 2:
Click the Configuration tab on the header.


Step 3:
Click Setup > Network in the navigation tree on the left side.
 

Step 4:
Under LAN SETTING, click Add a VLAN.


Step 5:
Enter your desired VLAN name under Description.
 

Step 6:
Set the Inter VLAN Routing to Enabled if you want to allow this VLAN to communicate with other sets of VLAN.  If not, set this to Disabled.
 

Step 7:
Set the Device Management to Enabled if you want to allow this VLAN to access the router's web-based setup page.  If not, set this to Disabled.


Step 8:
Configure the VLAN status of physical LAN ports. 

NOTE:  There can only be one (1) UnTagged VID for a LAN port.

User-added image

Step 9:
Click  at the bottom of the page to finish the configuration.

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT