- Improve the performance of the network without removing your older router
- Connect more devices (wired and wireless)
- Expand the wireless network range
- Isolate the network traffic
Cascading your Linksys Smart Wi-Fi Router to an existing router is simple and easy because you don’t have to manually configure the settings. The Linksys Smart Wi-Fi Router will detect that it is cascaded and will configure settings automatically for the connection to work.
NOTE: Before connecting your Linksys router, make sure you have an active Internet connection with your Primary router. The Primary router can be an existing router on your network or a modem/router given by your Internet Service Provider (ISP). If you do not have an active Internet connection on the Primary router, contact your ISP or the router manufacturer.
Follow the instructions below for cascading a Linksys Smart Wi-Fi Router:
Connect an Ethernet cable from your computer to any of the numbered ports (1-4) at the back of your Linksys Smart Wi-Fi Router.
Connect the Primary router to the Internet Port of the Linksys Smart Wi-Fi Router.
Plug the supplied power adapter to an electrical outlet and into the Linksys Smart Wi-Fi Router.
The Linksys Smart Wi-Fi Router will automatically change its IP address to the 10.X.X.X network. You can view this by accessing your command prompt.
You can now proceed with securing your Linksys Smart Wi-Fi Router’s wireless network. For instructions, click here.
QUICK TIP: If you have manually changed the IP address of your Linksys router, it will perform its auto detect and automatically change the IP address to the 10.X.X.X network once it has been reset.
Expanding your network
Your router has the capability to connect multiple devices in the network such as smartphones, tablets, game consoles and printers. If you have a large house with devices that require top wireless speeds and a wide range, you can also extend the range of your wireless network by using other networking devices from Linksys like the Powerline adapters.
Cascading (Connecting) a Linksys router to another router (Video)