- PLTK300 FREQUENTLY ASKED QUESTIONS
TABLE OF CONTENTS
The Linksys Powerline Turbo Bridge + Switch Kit (PLTK300) consists of one PLTE200 Powerline 1.0 Turbo Ethernet Adapter and one PLTS200 Powerline 1.0 Turbo Ethernet 4-Port Adapter.
These devices enable networking over existing Powerlines in the home without requiring you to set up any new wires. With them, you can use your Powerlines to transfer data up to 85 Mbps data rates on Powerlines with more than 10 Mbps TCP throughput. This is suitable for SDTV streams (uncompressed), networking, and VoIP. The device is also backward compatible with existing HomePlug 1.0 installations.
The device does not have an IP Address, a username, nor a password.
The Powerline utility that was pre-set in the CD is used to manage the PLTK300.
Yes, by using the Powerline utility.
The PLTK300 supports 56-Bit DES Link Encryption.
The Power LED lights up and stays solid while the Gateway is powered ON.
The LAN LED lights up solid when the Ethernet Link is detected. The LED light flashes while Sending/Receiving data.
The HomePlug LED lights up solid when a HomePlug Link is detected. The LED light flashes while Sending/Receiving data.
The maximum data transfer rate can be up to 85 Mbps data rates on Powerlines with more than 10 Mbps of TCP throughput.
The PLTK300 has an 85-240V AC, 50-60Hz internal power supply.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.