- Setting up wireless security on a Linksys router with Classic web-based setup page
Setting the security for your Linksys router helps keep your wireless network safe from unauthorized access. These security options are built-in on your Linksys router to provide and maintain your network's security, then give you choices depending on what degree of security you want to use.
There are three (3) main options in setting up security measures for your network:
- Enabling WEP or WPA™ / WPA2™ wireless security key or password on the router
- Enabling Wireless MAC Filter
- Disabling the SSID Broadcast of the router
NOTE: There are different wireless security modes with varying standards and improved features. These may be available depending on the model of the router. In addition, a combination of two (2) or three (3) of the mentioned security measures may also be employed for maximum wireless network security.
To set up wireless security on the Linksys router, follow the instructions below:
- Wi-Fi Protected Access® (WPA) is a type of wireless security which is dynamic in nature. This means that it changes depending on the time renewal you will specify.
- Wired Equivalent Protocol (WEP) is a type of wireless security which does not change. It provides comparable confidentiality to a traditional wired network.
For detailed instructions on setting up WEP, WPA or WPA2 wireless security on your router, click here.
NOTE: The WPA / WPA2 wireless security is highly recommended over WEP for a higher level of security. A WEP encryption is more susceptible to security breaches.
Enabling Wireless MAC Filter
Wireless access can be filtered using the Media Access Control (MAC) Address of the wireless devices transmitting within your network’s radius. You can either permit or prevent specific wireless computers access to your wireless network.
- To know how to permit wireless computers to connect to your wireless network, click here.
- To know how to prevent wireless computers to connect to your wireless network, click here.
Disabling the SSID Broadcast is one way of securing your wireless network. This will prevent other users from detecting your router’s wireless network name (SSID) when they scan for available wireless networks in your area. For instructions, click here.
NOTE: If you disable the SSID Broadcast of your Linksys router, your wireless device will not be able to detect when it searches for available wireless networks. For instructions on how to connect to a wireless network with disabled SSID Broadcast, click here.
- Changing important wireless settings like the wireless security mode, network password or wireless network name (SSID) while you have wireless devices connected to your network will temporarily disconnect the devices from the Internet. You will need to reconnect the devices with the new wireless settings. To learn how to connect wireless devices and gaming consoles to the network using Linksys Connect, click here.
- If your computer, laptop and other wireless devices used to connect using the old wireless settings, ensure that you reconnect the devices to the network. To learn how to connect wireless computers to your network, click here.
- Disabling the SSID Broadcast may help protect your wireless network in some way, but for a stronger security on your network, it is recommended to use a higher security mode such as WPA2 and utilizing a unique password or passphrase.
Wireless security checklist
Checking the Linksys Wi-Fi Router's name and Password
Checking the wireless network name and password
Guidelines in creating a wireless password or passphrase
Connecting wireless computers to your network
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.