text.skipToContent text.skipToNavigation

Connecting to the Wireless Network using a Wireless A/G Game Adapter

To connect the Wireless A/G Game adapter to a wireless network please determine your SSID and Wireless Security and/or Network Key. If you do not know your wireless settings and you’re using a Linksys router, click  here. If not, consult the user guide or the manufacturer of your router for assistance.

Setting-Up the Wireless A/G Game Adapter

Step 1:
Connect the Wireless Game Adapter to your router using an Ethernet cable. For instructions, click  here.

Step 2:
Access the Wireless A/G Game Adapter’s web-based setup page. For instructions, click  here.

Step 3:
When the Game Adapter’s setup page appears, look for the SSID field and enter the wireless network’s SSID.

Step 4:
Look for Network Type and select Infrastructure.

Step 5:
If WEP is not enabled on the wireless router, under Security, select Disabled then proceed to Step 10.

If WEP is enabled, under Security, select Enabled and click Edit Wireless Security then proceed to the step below.

Step 6:
When the WEP Encryption window appears, select the same Default Transmit Key as your router’s. In this example, we selected 1.

Step 7:
Select the same WEP Encryption level either 64Bit(10 hex digits) or 128Bit(26 hex digits). In this example we selected 64Bit(10 hex digits).

Step 8:
Enter the wireless network’s WEP Key based on the Default Transmit Key selected. Since we selected Key 1, we’ll enter the WEP Key in the Key 1 field.

Step 9:

Click .

Step 10:
When the Setup page appears, scroll down then click Refresh and select your wireless network’s SSID.

Step 11:
Once your SSID is selected, click Connect.

Step 12:
Click Apply and you’re done setting-up the Game Adapter.

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT