Accessing your Linksys wireless range extender's web-based setup page allows you to configure your advanced settings. If you encounter problems accessing it, this can be due to the following reasons:
Perform the following steps below if you are having problems accessing the Linksys wireless range extenders’ web-based setup page:
1. Check if your computer is connected to the range extender's Wi-Fi®
2. Check the indicator light of the range extender
Click on the links below to learn how to Setup your range extender again.
After restoring the device to its factory default settings, you may now try accessing the range extender’s web-based setup page. To learn how to do this, click here. If you are using RE7000, click here. If you are using RE6250 or RE6350, click here.
NOTE: If a dialog box asking for a username and password appears, leave the User name blank and enter “admin” in the Password field. For some range extenders you can use admin for both Username and Password
If you’re still unable to access the web-based setup page after resetting the range extender, make sure that your computer’s proxy settings are disabled. Click on the links below to know how to disable proxy settings on different browsers:
Internet Explorer®
Google Chrome™
Mozilla Firefox®
Safari®
- Connection to the device is not established
- The range extender is wirelessly connected to your network but it’s not detecting the internet connection from your network
Perform the following steps below if you are having problems accessing the Linksys wireless range extenders’ web-based setup page:
1. Check if your computer is connected to the range extender's Wi-Fi®
Make sure that you are connected to the Wi-Fi name of your range extender. To check, click on your computers’ Wireless Utility and it will display the SSID which your computer is connected to. If you are not connected to the range extender’s SSID, select the SSID on the list of available networks, enter the network password and click Connect or Join.
Once connected, access the range extender’s web-based setup page. For instructions, click here. If you are using Linksys RE7000, click here. If you are using Linksys RE6250 or Linksys RE6350, click here.
Once connected, access the range extender’s web-based setup page. For instructions, click here. If you are using Linksys RE7000, click here. If you are using Linksys RE6250 or Linksys RE6350, click here.
2. Check the indicator light of the range extender
The indicator light will help you identify the status of the extender. Check your product's User Guide to confirm if the range extender is connected to the network.
3. Powercycle the range extender
Disconnect and reconnect the range extender from the power source. Wait until the Power LED on the range extender is ready (Check the product’s User Guide to determine when the range extender is ready to access).
4. Check the computer’s connectivity to the device
A ping test can trace the communication between the computer and the range extender. To ping the range extender, you will need to obtain its IP address. To learn about ping test, click here. If your range extender is not yet configured, its default IP address is 192.168.1.1. Otherwise, you need to determine the extender’s IP address through the DHCP Client Table on your router. To know how, click here.
NOTE: If all the steps above failed, try to disable any security software on your computer before accessing the range extender’s web-based setup page. Click here to learn how to disable your computer’s firewall.
5. Reset the device to factory defaults
NOTE: Resetting your range extender will restore its factory settings and you will need to run the Setup CD again or manually set up your range extender.
Press and hold the Reset button of your range extender for five to 10 seconds or until the LED starts blinking. For complete instructions on how to reset your Linksys wireless range extender to factory default settings, click here.
Click on the links below to learn how to Setup your range extender again.
Setting up your Linksys RE1000, RE3000W, or RE4100W range extender using the setup CD
Setting up the RE2000, RE2000 v2 and RE4000W using the Setup Wizard
Setting up your Linksys AC1200 Amplify Wi-Fi Range Extender, RE6700
Setting up the Linksys RE6400 AC1200 BOOST EX Wi-Fi Range Extender
Setting up the Linksys RE6300 AC750 BOOST Wi-Fi Range Extender
Manually configuring a Linksys Wireless-N Range Extender
Manually setting up the Linksys RE6800 AC1750 Wi-Fi Range Extender
Setting up the Linksys AC1200 Max Wi-Fi Range Extender, RE6500
Setting up the Linksys RE6250 AC750 Wi-Fi Range Extender
Setting up the RE2000, RE2000 v2 and RE4000W using the Setup Wizard
Setting up your Linksys AC1200 Amplify Wi-Fi Range Extender, RE6700
Setting up the Linksys RE6400 AC1200 BOOST EX Wi-Fi Range Extender
Setting up the Linksys RE6300 AC750 BOOST Wi-Fi Range Extender
Manually configuring a Linksys Wireless-N Range Extender
Manually setting up the Linksys RE6800 AC1750 Wi-Fi Range Extender
Setting up the Linksys AC1200 Max Wi-Fi Range Extender, RE6500
Setting up the Linksys RE6250 AC750 Wi-Fi Range Extender
After restoring the device to its factory default settings, you may now try accessing the range extender’s web-based setup page. To learn how to do this, click here. If you are using RE7000, click here. If you are using RE6250 or RE6350, click here.
NOTE: If a dialog box asking for a username and password appears, leave the User name blank and enter “admin” in the Password field. For some range extenders you can use admin for both Username and Password
If you’re still unable to access the web-based setup page after resetting the range extender, make sure that your computer’s proxy settings are disabled. Click on the links below to know how to disable proxy settings on different browsers:
Internet Explorer®
Google Chrome™
Mozilla Firefox®
Safari®