Australia
Hong Kong
Indonesia
India
China
Singapore
Thailand
Japan
Vietnam
Philippines
New Zealand
Malaysia
Korea
Attaching or releasing Linksys power adapter modules
Some power adapters for Linksys devices have different adapter modules for regional power sockets. The mechanisms for attaching or releasing the modules are different depending on the model of the power adapter. This article will teach you how to attach or release the modules to or from your power adapter. Check the module socket design on your power adapter and select from below for the specific instructions.
Slide-in type
Snap-in type
Slide-in type
Step 2:
Slide the module in until you hear the lock click.
Step 2:
Using your other hand, grip the module firmly and slide it out to the opposite direction of the release button.
Snap-in type
Step 2:
Push the opposite edge towards the socket until you hear the lock click.
You’ve now successfully attached the module into your power adapter.
Releasing the module
Step 2:
Press the button firmly until the module pops out.
You have now successfully released the module from the power adapter.
Slide-in type
Snap-in type
Slide-in type
Attaching the module
Step 1:
Align the adapter module with its back side (opposite the plug side) facing the socket side on the power adapter.
Align the adapter module with its back side (opposite the plug side) facing the socket side on the power adapter.
Step 2:
Slide the module in until you hear the lock click.
You’ve now successfully attached the module into your power adapter.
Releasing the module
Step 1:
Press and hold your thumb firmly on the lock release button
Press and hold your thumb firmly on the lock release button
Step 2:
Using your other hand, grip the module firmly and slide it out to the opposite direction of the release button.
You have now successfully released the module from the power adapter.
Snap-in type
Attaching the module
Step 1:
Lock the hook edge behind the module socket onto the power adapter.
Lock the hook edge behind the module socket onto the power adapter.
Step 2:
Push the opposite edge towards the socket until you hear the lock click.
You’ve now successfully attached the module into your power adapter.
Releasing the module
Step 1:
Locate the open / release button below the socket on the power adapter.
Locate the open / release button below the socket on the power adapter.
Step 2:
Press the button firmly until the module pops out.
You have now successfully released the module from the power adapter.
Was this support article useful?
Additional Support Questions?
Search Again
CONTACT SUPPORT
-
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Linksys.com FAQs
Tech Support
Get help with an issue or learn how to maximise the potential of my Linksys product.
