Light behavior of the Linksys MR6350

User-added image

The
Linksys MR6350 Max-Streamâ„¢ AC1300 Dual-Band Mesh WiFi 5 Router has a single multi-colored light on top and ethernet port lights at the back.

The table below describes the colors and activities of the lights for every connection status or step, such as in setting up the router, and you will also see tips on what to do for each situation.


Top Light
 
Light Description
Status
Blue (blinking)
Starting up/ Wi-Fi Protected Setup™ (WPS) pairing started
Wait for the router to finish starting up or the WPS pairing to complete.
Purple
Ready for the setup 
Open the Linksys app to complete setting up the router.
Purple (blinking)
The setup is in progress. 
Follow the instructions in the app.
Blue
Connected to the internet/WPS sharing is successful
The router is online.  Everything is good.
YellowWeak signal (child nodes only)
Red
No internet
Not online, check with your internet service provider (ISP) for service interruptions.
Red (blinking)
Not plugged into the modem
Make sure that your router is firmly connected to the modem.
Yellow (blinking)WPS pairing is unsuccessful.
 
LAN/WAN Port Lights
 
Port
Color
Activity
Status
 
 
Ethernet (LAN port lights)
Green
(Link)
Off
The link is down.
Solid On
The device is connected and the link is up.
Orange
(Activity)
Off
No TX/RX activities.
Flashing
Data transferring is in progress.
 
Internet (WAN port lights)
Green
(Link)
Off
The link is down.
Solid On
The device is connected and link is up.
Orange
(Activity)
Off
No TX/RX activities.
Flashing
Data transferring is in progress.

Was this support article useful?

Additional Support Questions?
Search Again