Your router is capable of either an automatic or manual firmware upgrade. This article will show you steps on how to manually upgrade your Linksys Wi-Fi Router's firmware. If you are using a Linksys Smart Wi-Fi Router, click here for instructions.
Use a wired computer for stable connectivity. It is NOT recommended to update the firmware via Wi-Fi as it may cause permanent damage to the router.
Use another browser if your default browser does not work. Alternatively, you can use another computer to perform the upgrade.
Download the correct firmware and version for your device.
If you have a storage device connected to the router, make sure to remove it before upgrading the router’s firmware to prevent data loss.
Make sure that you have created a backup configuration.
NOTE: Steps and images may vary depending on your router's model.
You should find the model number and serial number on the router's label at the bottom.
NOTE: Identifying the appropriate model and version number will help download the correct firmware. If your router has no version number, this means that your device is a version 1 model. To learn how to find your device's model number, click here.
Launch a web browser and enter “192.168.1.1” in the Address bar then press [Enter]. If the IP address does not work or if it has been changed, check your router's local IP address.
Enter your login credentials. The default password is admin. If you changed or personalized your password, use that instead.
Click on Administration > Firmware Upgrade.
Click the Browse… button.
NOTE: Some routers have a Choose File button.
Locate and select the file that you have downloaded then click Open.
NOTE: If you are using Mac OS X®, click the Choose button.
Click the Start Upgrade button.
NOTE: Some routers display Upgrade only.
IMPORTANT: Do NOT turn OFF the power or press the reset button of the router during the upgrade process.
If you have selected an incorrect file, a prompt similar to the image below will appear. If this happens, click the OK button and repeat Steps 2 to 4 and select the correct file.
Click Continue when it prompts that the upgrade has been successful.
Turn the router OFF then turn it back ON.
You should now have manually upgraded the firmware of your Linksys Wi-Fi Router.
Resetting and re-configuring the router
Setting up a Linksys router with DSL Internet service
List of Linksys devices’ downloadable files
How to turn OFF my router’s or gateway’s Wi-Fi