How to configure VLAN on a Linksys E2500 for Maxis

Follow the steps below to learn how to configure Virtual LAN (VLAN) on a Linksys E2500 for Maxis Internet Service Provider (ISP):
 

1. Access the router’s web interface.
 
2. Once you’re in the router’s web interface, click the VLAN Setup.

 
sf139021-001_en_v4.png
 

3. Enter 621 as the trunk VID in the VLAN ID field.

 
sf139021-002_en_v4.png
 
4. In the same row, select Tagged under Internet. Then, click the Enable checkbox.

 
sf139021-003_en_v4.png
 
5. In the next row, enter 822 as the port VID in the VLAN ID field. Then, enter “IPTV” in the field under Default Internet.

 
sf139021-004_en_v4.png
 
6. In the same row, select Tagged under Internet, then select Untagged under Port 3. and leave the other drop-down boxes as Excluded. Once done, click the Enable checkbox.
sf139021-005_en_v4.png
 
7. In the next row, enter 821 as the port VID in the VLAN ID field. Then, enter VOIP in the Default Internet field.

 
sf139021-006_en_v4.png
 
8. In the same row, select Tagged under Internet, then select Untagged under Port 4. Leave the other drop-down boxes as Excluded. Once done, click the Enable checkbox.

 
sf139021-007_en_v4.png
 
9. Click Save Settings.
 
You should have successfully configured VLAN on a Linksys E2500 for Maxis.
 
 

Was this support article useful?

Additional Support Questions?
Search Again