How to configure VLAN on a Linksys E1700 for UniFi

Follow the steps below to learn how to configure Virtual LAN (VLAN) on the Linksys E1700 for UniFi Internet Service Provider (ISP):

1. Access the router’s web interface.  

2. Once you’re on the router’s web interface, click the VLAN Setup.

 
sf139075-001_en_v3.png
 
3. Enter 500 as the trunk VID in the VLAN ID field.

 
sf139075-002_en_v3.png

4. In the same row, select Tagged under Internet. Then, click the Enable checkbox.
 
sf139075-003_en_v3.png
 
5. In the next row, enter 600 as the port VID in the VLAN ID field.

 
sf139075-004_en_v3.png
 
6. In the same row, select Tagged under Internet. Then, click the Enable checkbox.

 
sf139075-005_en_v3.png
 
7. In the first drop-down box under Port 1, select Untagged.

 
sf139075-006_en_v3.png
 
Leave the other drop-down boxes as Excluded.
 
8. Click Save Settings.
 
You should have successfully configured VLAN on a Linksys E1700 for UniFi.
 

Was this support article useful?

Additional Support Questions?
Search Again