RE2000 v2 product features and specifications

Below are the product features and specifications of the Linksys Range Extender N600 Dual-Band, RE2000 v2.

Product Features
Wireless StandardsIEEE 802.11 a/n/g/b
Maximum Distance/Range300 m / 1000 ft*
PortsFast Ethernet, C7 connector for localized AC cable or clip
ButtonsReset, Wi-Fi Protected Setup™ (WPS)
LEDsPower/Wi-Fi Protected Setup™, Ethernet (link, activity)
Security FeaturesWi-Fi Protected Access™ 2 (WPA2), Wi-Fi Protected Access™ (WPA), WEP
Security KeyUp to 128-bit encryption

*The maximum distance or range that the range extender has depends on the technology that the device is using.  Since the RE2000 v2 supports Wireless-N, -G, and -B standards, its maximum range is similar to the one used by the most recent Wireless-N standard which is 300 m or 1000 ft.

NOTE:  The maximum distance/range is only achieved if the device is set up in an environment that is devoid of any interference.  The router being used with the extender can also affect the range that it can provide.  For example, using RE2000 v2 with a Wireless-G router would make the extender operate on a Wireless-G speed.

Product Specifications
Transmitted PowerTolerance: +/- 1.5 dBm
802.11n:  15 dBm @MCS15, channel 6 (2.4 GHZ, HT20)
802.11n:  15 dBm @MCS15, channel 6 (2.4 GHZ, HT40)
802.11n:  11 dBm @MCS15, channel 36 (5.0 GHZ, HT20)
802.11n:  11 dBm @MCS15, channel 36 (5.0 GHZ, HT40)
802.11g:  16 dBm @54 Mbps, channel 6
802.11a:  12 dBm @54 Mbps, channel 36
Receive Sensitivity802.11n:  -70 dBm @ 150 Mbps (2.4 GHz, HT20)
802.11n:  -66 dBm @ 300 Mbps (2.4 GHz, HT40)
802.11g:  -72 dBm @ 54 Mbps
802.11n:  -68 dBm @ 150 Mbps (5 GHz, HT20)
802.11n:  -64 dBm @ 300 Mbps (5 GHz, HT40)
802.11a:  -70 dBm @ 54 Mbps
Cabling TypeCAT5e
Antennas2 (internal)
Antenna Peak Gain2.4 GHz Antenna 0 4 dB/ Antenna 1 2.8 dB & 5 GHz Antenna 0 4 dB/ Antenna 1 3.8 dB
Dimensions4.96” x 3.62” x 1.32”
(126 x 92 x 33.5 mm)
Weight2.5 oz (70 g)
PowerInternal AC/DC power supply 100-240 V, 50/60 Hz, 0.5 A
Operating Temperature32 to 104 °F (0 to 40 °C)
Storage Temperature-4 to 140 °F (-20 to 60 °C)
Operating Humidity10 to 80% Noncondensing
Storage Humidity5 to 90% Noncondensing
NOTE:  The product specifications are subject to change without prior notice.

Related Article:

Getting to know the Linksys RE2000 v2

Was this support article useful?

Additional Support Questions?
Search Again