How to configure VLAN on a Linksys E1700 for Maxis ISP

Follow the steps below to learn how to configure virtual LAN (VLAN) on a Linksys E1700 for Maxis ISP. Some steps in this article may vary depending on the version of your device.
 
1. Open a web browser, enter “192.168.1.1” in the Address bar then press [Enter], type your login credentials, then click on Login.
 
2. You will land on Setup. Click on VLAN Setup.

 
sf141184-001_en_v2.png
  
3. Enter “621” as the trunk VID in the VLAN ID field.
 
sf141184-002_en_v2.png
 
4. In the same row, select Tagged under Internet. Then, check the Enable box.

sf141184-003_en_v2.png
 
5. In the next row, enter “822” as the port VID in the VLAN ID field. Then, enter “IPTV” in the empty field.
 
sf141184-004_en_v2.png
  
6. In the same row, select Tagged under Internet, then select Untagged under Port 3. Once done, check the Enable box.
 
sf141184-005_en_v2.png
  
 
7. In the next row, enter “821” as the port VID in the VLAN ID field. Then, enter “VOIP” in the empty field.
 
sf141184-006_en_v2.png
 
 
8. In the same row, select Tagged under Internet, then select Untagged under Port 4. Once done, check the Enable box. Leave the other drop-down boxes as Excluded.
 
sf141184-007_en_v2.png
 
 
9. Click Save Settings.
 
You now have successfully set up VLAN on the Linksys E1700 for Maxis ISP.

Was this support article useful?

Additional Support Questions?
Search Again