Overview of the Advanced Settings on the Linksys app for Linksys Intelligent Mesh

The Advanced Settings feature allows you to configure the Internet Settings, Port Settings, Wi-Fi MAC Filters, and Local Network Settings of your Linksys Intelligent Mesh network using the Linksys app.  This article provides an overview of this feature.

NOTE:  To access this feature from the dashboard, tap on the menu icon at the upper left portion of your screen then go to Advanced Settings.

 
iOSAndroidâ„¢
sf294011-001_en_v5.pngsf294011-002_en_v5.png
 
Internet Settings

This section allows you to configure the Internet Settings of your mesh network.


sf294011-003_en_v5.png
 
SettingDescription
Connection TypeTap to change the Connection Type.  Options include Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, L2TP and Bridge Mode.

sf294011-004_en_v5.png
 
IPv6Tap to change the IPv6 settings.  Options include Automatic,
PPPoE, and Passthrough.


sf294011-005_en_v5.png
 
Additional SettingsTap to change the MTU size and configure the MAC Address Clone.

sf294011-006_en_v5.png
 
 
Port Settings

Use the Port Settings screen to add rules to send traffic from specific ports or ranges of ports to specific connected devices.  You can also configure your router to remember which ports a device uses to send data so data returning through that port is sent to that device.

sf294011-007_en_v5.png
 
SettingDescription
Single Port ForwardingTap to configure Single Port Forwarding, edit existing rules, disable a rule, and delete a rule.

sf294011-008_en_v5.png

NOTE:  All three sections under Port Settings will have an option to Add a Rule.

sf294011-009_en_v5.png
 
Port Range ForwardingTap to configure Port Range Forwarding, edit existing rules, disable a rule, and delete a rule.

sf294011-010_en_v5.png
 
Port Range
Triggering
Configure Port Range Triggering in the section shown below.
 

sf294011-011_en_v5.png
 
 
Wi-Fi MAC Filters

Tap to configure the Wi-Fi MAC Filters of your device.

 
SettingDescription
Wi-Fi MAC FiltersTap Edit to change the Wi-Fi MAC Filter Status.

sf294011-012_en_v5.png

If the Off option is not selected, enabling the Wi-Fi MAC Filters would either function as Allow Access or Deny Access.

sf294011-013_en_v5.png
 
 
Local Network Settings

Configure the local network settings of your mesh network.

 
SettingDescription
Router Details and
DHCP Server
You can change the IP address settings of your mesh network on Router Details.  This section also allows you to change the DHCP Server settings of your mesh network.

sf294011-014_en_v5.png
 
DNS SettingsChange the DNS Settings of your mesh network.  By default, Auto is selected. 

sf294011-015_en_v5.png

Tap to select Manual and scroll down to make the necessary DNS changes. 

sf294011-016_en_v5.png
 

Was this support article useful?

Additional Support Questions?
Search Again