Before you start, make sure to check the following:
- Consult your device's documentation or online support site to find out what ports you need to trigger for your device as they differ depending on the application being used.
- If you are a Digital Subscriber Line (DSL) Internet subscriber, your DSL modem should be set to bridge mode. Consult your modem's documentation or online help for instructions or contact your Internet Service Provider (ISP) and request that your modem be set to bridge mode.
Log in to the Linksys Dual-Band WiFi Router's web interface. For instructions, click here.
Click the Configuration tab.
Click Port Range Triggering.
In the Port Range Triggering page, click on Add a New Port Range Triggering.
Enter the port details of the device or application you want to open. Provide the Application Name, Triggered and Forwarded Range. Then, check the Enabled box.