The Cross Band technology maximizes the simultaneous use of both bands (2.4 GHz and 5 GHz) for high speed data transfer and uninterrupted streaming and gaming. It receives a signal on one (1) frequency and transmits simultaneously on another channel for the purpose of full duplex communication. So rather than taking turns to transmit on the same frequency, both clients can transmit at the same time but on different bands.
NOTE: It is recommended to leave the default setting on Auto for better performance.
Cross Band technology
Auto
Default setting. Lets the extender automatically choose the suitable path to transmit data between the device and wireless router or access point. Recommended and preferred.
Manual
Selects preferred path to transmit data between device and wireless router or access point.
Configuration on the Uplink section is independent of the configuration of the Local Extended Network. Example, users can force uplink to use 2.4 GHz only and will not restrict users to any of the three (3) options for running the Local Extender Network.
Uplink
Non-cross Dual Band
Choose this option if you don't need the Cross Band feature.
If the device connects to the extender using 5 GHz, then the extender will go through 5 GHz to transmit data.
If the device connects to the extender using 2.4 GHz, then the extender will go through 2.4 GHz to transmit data.
Cross Dual Band
Choose this option if you want to force data transmitting by cross band. Preferred option for faster performance.
If the device connects to the extender using 5 GHz, then the extender will go through 2.4 GHz to transmit data to the router.
If the device connects to the extender using 2.4 GHz, then the extender will go through 5 GHz to transmit data to the router.
2.4G Only
Choose this option if you want to force data to transmit through 2.4 GHz only between extender and root.
5G Only
Choose this option if you want to force data to transmit through 5 GHz only between extender and root.
Local Extended Network
Concurrent Dual Band
Allows device to use dual band connection with the extender.
2.4G Only
Allows device to use 2.4 GHz connection with the extender only.
This option disables the 5 GHz Extended link, and not the Uplink.
5G Only
Allows device to use 5 GHz connection with the extender only.
This option disables the 2.4 GHz Extended link, and not the Uplink.
Was this support article useful?
Thank you for your feedback.
Feedback
Please tell us how we can make this article useful.
* Required
Terms and Conditions for Linksys Cloud Manger 2.0 Migration
v0.1
By clicking the CONFIRM button I accept the Terms and Conditions related to the migration from Linksys Cloud
Manager 1.0 (LCM1) accessible via www.business.linksys.com to Linksys Cloud Manager 2.0 (LCM2) accessible via www.cloudmanager.linksys.com for all
devices purchased with the LCM1 firmware including LAPAC1200C, LAPAC1750C, LAPAC2600C and all regional
variations. Migrating from LCM1 to LCM2 provides for new functionality, but also changes and eliminates
other features. Those that are comfortable with the functionality provided in LCM1 do not have to migrate
but should know that Linksys will not be developing new functionality based on the LCM1 platform. Details of
the changes are outlined below. Please read carefully before initiating firmware migration.
Important facts to be aware of before migrating:
Once Access Points are upgraded with the new LCM2 firmware, these Access Points cannot revert
back to LCM1 firmware or be used with the LCM1 platform.
The firmware update is required for the Access Points to work with LCM2. Please make sure you are
comfortable with the feature changes before migrating over.
Existing LCM1 users will need to create new accounts in LCM2 in order to use it. All LCM1 account
information, including user profiles and network settings, will not be transferred to LCM2.
Linksys will continue to operate the LCM1 platform for the duration of the 5 year term offered,
then end of life the service. Once Access Points are upgraded, this 5-year cloud license for
LCM1 is replaced with the new license terms for LCM2.
Access Points upgraded to LCM2 firmware will have access to LCM2 for the lifetime of the product.
The migration to LCM2 brings new improvements over LCM1 which are listed here (Link to marketing document),
but also changes and eliminates some functionality currently available in LCM1:
No Stand Alone Option
The AP will not provide the capability to be configured and managed as a stand-alone device (with
exception of configuring connection parameters, i.e. IP address, subnet mask, gateway, VLAN).
All management features will now be cloud based. Once configured, the AP can continue operating
without a cloud connection, but a cloud connection will be required to make configuration
changes.
No Historic Data
Data usage statistics of clients and APs will be real-time only – i.e., populating for the
duration of the active cloud session. No historical statistics will be available, e.g. past 7
days, last 24 hours with the exception of online/offline status for devices.
Rogue AP Detection, Block Clients, Band Steering
Not included in LCM2 launch version. To be provided in future releases.
For any technical issues, please consult our online Linksys Cloud
Manager 1.0 to 2.0 Migration Guide or contact us at https://www.linksys.com/support. For North American phone support, call our
dedicated Business Technical Support line Monday-Friday, 5am-11pm PST at: +1 (877) 855-6899. For all other
regions, go here
to see your support options or contact your local Linksys office for more information.
Australia
Hong Kong
Indonesia
India
China
Singapore
Thailand
Japan
Vietnam
Philippines
New Zealand
Malaysia
Korea
