text.skipToContent text.skipToNavigation

Overview of the Disk settings for the Linksys E7350

This article provides an overview of the Disk settings of the Linksys E7350 AX1800 Dual-Band WiFi 6 Router.

NOTE:  The USB storage feature is only supported on the parent Linksys E7350 (the router connected to your modem).

To access this feature, follow the instructions below:

 
Step 1:
Access the web interface of your router.  For instructions, click here.

Step 2:
Under the User-added image tab, click on External Storage.

Step 3:
Click on Disk.

The table below shows the settings that can be configured under Disk:
 
FeatureDescription
Disk1
Below are the default settings when no drives are attached:

User-added image

The Linksys E7350 supports the following file systems:  FAT, FAT32, NTFS, and HFS+ journaled and non-journaled.

 
Create Share
Click to create a Share on the drive or you can also choose to share the entire partition.  For instructions, click here.
 
Safely Remove Disk
Before physically disconnecting a USB disk from the router, click Safely Remove Disk first.  This prevents the possible loss of data, which may occur if you remove the disk while it is transferring data. 
 
Shared Folder
 
 
User-added image
 
  • Router Name - The device name (or NetBIOS name) of the router is displayed.  You can always change the name by going to Configuration > Connectivity Local Network.
  • Shared Disk IP Address - The IP address of the disk is displayed.
 
Share List
 
User-added image
 
  • Click Summary to view a list of Shared Folders.
  • Click Edit to change the access settings of a Shared Folder. 
  • Click Delete to delete a Shared Folder.
Format Disk

If you would like to format a disk as FAT32, check the box of the disk you want to format then click Format Disk.

NOTE:
  If your disk was formatted with multiple partitions, then the formatting will delete them and create a single partition.

Check the box and click Format Disk.

 
User-added image

Read the warning and click OK to proceed.
 
User-added image

Enter a name for the partition then click Format.
 
User-added image
 
Refresh

Click to refresh the External Storage screen.
 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT