The Linksys LAPAC1300CW AC1300 WiFi 5 MU-MIMO Cloud Managed Wireless Access Point is an 802.11AC Wave 2 Dual-Band WiFi Access Point (2.4GHz + 5GHz) designed with 2x2 internal antennas for 1300Mbps* total WiFi speed. Optimized for hospitality and multi-dwelling units, this access point can be installed into a single gang wall outlet for in room WiFi and wired connectivity. All cloud managed access points can be configured remotely or with Zero Touch Provisioning using our cloud-native management portal. Powered by AWS microservices, our cloud communication is secure, lightweight and extremely fast compared to outdated server or controller architectures. With Linksys Cloud Manager, you get instant scalability with no limit to the number of networks and devices you can manage.
With our Cloud-Native Management portal, Access Points can be configured remotely or with Zero Touch Provisioning. The portal is powered by AWS Microservices and ensures our cloud communication will be secure, lightweight, and extremely fast. Our portal offers instant scalability with no limit to the number of networks and devices you can manage.
*Specifications are subject to change without notice. An active, customer-purchased Internet Service Provider broadband account is required for connection of this product and other connected devices to the Internet. Some devices may require additional wireless adapters or an Ethernet cable to connect. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance may vary, including lower wireless network capacity, data throughput rate, speed, range and coverage. Performance depends upon many factors, conditions and variables, including building materials and construction, volume of network traffic, mix of wireless products used, interference and other adverse conditions. In order to achieve the best performance, this product must be used with compatible AC1200, AC1750 and AC2600 wireless devices. The standard transmission rates — LAPAC1300C/CE/CW: 867 Mbps (for 5 GHz radio), 400 Mbps (for 2.4 GHz) — are the physical data rates. Actual data throughput will be lower and may depend on the mix of wireless products used and external factors. May require a software/firmware update available for download at linksys.com/support.