- Configuring a static IP address on the Network Media Hub
This article will guide you on how to set a static IP address on your Network Media Hub through the Internet.
NOTE: The Remote Access Feature of your Media Hub is disabled by default. In order to access the Media Hub through the Internet, you must first enable Remote Access by following these steps:
Open a web browser.
In the Address bar, type either the name you have created for the Network Media Hub or its IP address.
NOTE: By default, the IP Address of the media hub is 192.168.1.120.
On the main screen, click on the Configuration icon.
Enter the password you have created for the Media Hub then click on Submit.
NOTE: The default password is admin.
NOTE: Check the Save Password box if you don't want to key in the password on your next login.
Click on the System icon.
Click Change on the IP Address section.
Uncheck the Enable DHCP box.
Assign the IP address information and click on Submit.
Click OK when you see this warning screen.
Click OK again in the confirmation box.
NOTE: Your Media Hub should now be using a Static IP address.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.