Setting up your Velop system with an iOS mobile device

User-added image

Setting up your Velop is easy through the Linksys app.  The app provides an animated guide and automatically identifies the nodes to be set up making the process secure, seamless, and simple.  Follow the steps below to set up the parent Velop node using an iOS device.


Requirements

 
1.  Latest Linksys app version
2.  Latest iOS mobile device 
3.  A working internet connection via a modem or modem router (gateway)
 

 

Directions
 
Step 1:
Disconnect the modem from the power outlet and remove your existing router. 

Step 2:
Connect the modem to the internet port on the node.

Step 3:
Connect the modem and the node to the power outlet.  Wait for the light on the node to turn solid purple.

Step 4:
Once the light on the node is solid purple, open the Linksys app and tap on Set up a New Wi-Fi Network

User-added image

Step 5:
Turn on Bluetooth® if prompted.  Otherwise, tap I would rather set up without Bluetooth.

User-added image

Step 6:
Read the Terms and Conditions then tap Agree.
 
User-added image

Step 7:
You will be prompted to select what type of device you are setting up.  Tap on the option for VELOP.

User-added image

Step 8:
Plug in your node then tap It's Plugged In.

User-added image

Step 9:
Position your node accordingly then tap Next.

User-added image

Step 10:
On the next screen, tap It's In the Open.

User-added image

Step 11:
Follow the on-screen instructions then tap It's Connected.

User-added image

User-added image

Step 12: 
If the light has started to flash purple click Yes, it's Blinking Purple.  Otherwise click No, It's Not Blinking Purple for further instructions.


User-added image

NOTE:  If you have other nodes turned on with purple lights, turn them OFF for now until your parent node is set up.

Step 13: 
Setup will check for internet connection.

User-added image

NOTE:  If internet connection is not detected especially for PPPoE connections or if you have a Static WAN IP address, you will be prompted to check your wiring.  If a connection is still not found, the screen below will display:

User-added image

Tap on Do you have ISP settings to enter? and select your internet connection.

User-added image

User-added image

Step 14:
Create a Linksys server account or click Log in to enter your existing account credentials.

User-added image

User-added image

Step 15:
Wait for the node to be linked to your account.

User-added image

Step 16:
Personalize your WiFi by entering your preferred settings and tap Next.

User-added image

Step 17:
Wait as setup configures your network.

User-added image

Step 18:
Select a location for the node then tap Next.

User-added image

NOTE:  If you want to customize your node's name, tap Name it something else and enter your preferred name.

User-added image

Step 19:
Success!  You have set up the node.  Tap Next.

User-added image

Step 20:
If you need to add another node, tap on Add a Node.  Otherwise, tap That's It for Now.  You can always add more nodes later.

User-added image

Step 21:
Updates for the node will automatically happen overnight.  The node can also report crashes to Linksys to make your WiFi better.  Tap on Next to continue.


User-added image

Step 22:
Your WiFi should now be ready!  Tap Go to Dashboard to see the status of your connection and devices.

User-added image

User-added image



Related Article:


Adding a child node to your Velop system using an iOS mobile device

這篇教學文章是否有用?

您有其他支援方面的問題嗎?
再次搜尋