List of tested USB devices that are compatible with the Linksys E8350
List of tested USB devices that are compatible with the Linksys E8350
Share the Article:
This article shows the list of USB devices that have been tested to be compatible with the Linksys AC2400 Dual Band Gigabit Wi-Fi Router, E8350.
Manufacturer
Model
Capacity
SanDisk®
SanDisk Cruzer
4Gb
SanDisk®
SanDisk Cruzer
2Gb
SanDisk®
Sandisk Cruzer Thumbdrive
2GB
Buffalo®
DriveStation Axis Velocity
3Tb
Buffalo®
Buffalo MiniStation Stealth USB3.0 External HDD
1TB
Buffalo®
BUFFALO DriveStation Axis Velocity USB3.0 External Hard Drive
3TB
Intel®
Intel SSD 530 Series
240Gb
Western Digital®
Western Digital Enterprise Storage WD VelociRaptor
300Gb
Western Digital®
Western Digital WD10EWS
1Tb
Western Digital®
Western Digital SATA
500GB
Western Digital®
Western Digital SATA
1TB
Western Digital®
WD_10EVVS_Internal HDD
1TB
Western Digital®
WD_20EVDS_ Internal HDD
2TB
Western Digital®
WD 5000AVVS Internal HDD
500GB
Western Digital®
WD MyBook Mirror Edition_External HDD
2TB
Western Digital®
WD MyPassport Elite External HDD
500GB
Western Digital®
WD My Passport USB3.0 Portable Hard Drive
2TB
HP
HP V125
8GB
iOmega
iOmega RPHD-U
320GB
Lexar®
Lexar Thumbdrive
8GB
Patriot
Patriot Dash Thumbdrive
4GB
Seagate
Seagate FreeAgent External HDD
1.5TB
Seagate
Seagate FreeAgent GoFlex Desk USB3.0 External HDD
3TB
Seagate
Seagate Expansion USB3.0 External Hard Drive
3TB
Was this support article useful?
Thank you for your feedback.
Feedback
Please tell us how we can make this article useful.
* Required
Terms and Conditions for Linksys Cloud Manger 2.0 Migration
v0.1
By clicking the CONFIRM button I accept the Terms and Conditions related to the migration from Linksys Cloud
Manager 1.0 (LCM1) accessible via www.business.linksys.com to Linksys Cloud Manager 2.0 (LCM2) accessible via www.cloudmanager.linksys.com for all
devices purchased with the LCM1 firmware including LAPAC1200C, LAPAC1750C, LAPAC2600C and all regional
variations. Migrating from LCM1 to LCM2 provides for new functionality, but also changes and eliminates
other features. Those that are comfortable with the functionality provided in LCM1 do not have to migrate
but should know that Linksys will not be developing new functionality based on the LCM1 platform. Details of
the changes are outlined below. Please read carefully before initiating firmware migration.
Important facts to be aware of before migrating:
Once Access Points are upgraded with the new LCM2 firmware, these Access Points cannot revert
back to LCM1 firmware or be used with the LCM1 platform.
The firmware update is required for the Access Points to work with LCM2. Please make sure you are
comfortable with the feature changes before migrating over.
Existing LCM1 users will need to create new accounts in LCM2 in order to use it. All LCM1 account
information, including user profiles and network settings, will not be transferred to LCM2.
Linksys will continue to operate the LCM1 platform for the duration of the 5 year term offered,
then end of life the service. Once Access Points are upgraded, this 5-year cloud license for
LCM1 is replaced with the new license terms for LCM2.
Access Points upgraded to LCM2 firmware will have access to LCM2 for the lifetime of the product.
The migration to LCM2 brings new improvements over LCM1 which are listed here (Link to marketing document),
but also changes and eliminates some functionality currently available in LCM1:
No Stand Alone Option
The AP will not provide the capability to be configured and managed as a stand-alone device (with
exception of configuring connection parameters, i.e. IP address, subnet mask, gateway, VLAN).
All management features will now be cloud based. Once configured, the AP can continue operating
without a cloud connection, but a cloud connection will be required to make configuration
changes.
No Historic Data
Data usage statistics of clients and APs will be real-time only – i.e., populating for the
duration of the active cloud session. No historical statistics will be available, e.g. past 7
days, last 24 hours with the exception of online/offline status for devices.
Rogue AP Detection, Block Clients, Band Steering
Not included in LCM2 launch version. To be provided in future releases.
For any technical issues, please consult our online Linksys Cloud
Manager 1.0 to 2.0 Migration Guide or contact us at https://www.linksys.com/support. For North American phone support, call our
dedicated Business Technical Support line Monday-Friday, 5am-11pm PST at: +1 (877) 855-6899. For all other
regions, go here
to see your support options or contact your local Linksys office for more information.