- Wall-mounting a powerline AV network adapter
This article will show you the process of wall-mounting the PLE300/PLS300.
The adapter has four (4) wall-mount slots on its back panel. The distance between two adjacent slots is 60mm (2.36 inches). Two (2) screws are needed to mount the adapter.
Drill two holes into the wall and make sure that the holes are 60mm (2.36 inches) apart from each other.
QUICK TIP: Make sure that the location is within reach of an electrical outlet.
Insert a screw into each hole and leave 3mm (0.12 inches) of its head exposed.
Maneuver the adapter so the two wall-mount slots line up with the two screws.
Please place the wall-mount slots over the screws and slide the adapter down until the screws fit snugly into the wall-mount slots.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.