This article will guide you on how to set a unique network password on the Powerline adapter connected to your computer. For instructions, follow the steps below:
NOTE: All of the Powerline devices must use the same network password. Otherwise, the adapters will not be able to properly communicate.
Step 1:
Launch the Powerline Adapter Configuration Utility. Double-click on the Powerline Utility icon on your desktop. You can also click Start>All Programs>Linksys>PLE200.
NOTE: In this example, we are using PLE200.
Step 2:
Click on the Security tab.
Step 3:
Enter your unique Network Password on the field provided.
NOTE: The network password must have 4-24 characters and is case-sensitive. You can click on Restore Default to restore your network password to its default settings.
Step 4:
Click .
Your new unique network password for your Powerline adapter is now set.
Related Articles:
How powerline networking works
Creating a network and sharing Internet access using Powerline adapters
Common powerline networking issues