Resetting Wireless-G Music Bridge to Factory Default

Resetting the Music Bridge will erase all of your settings and replace them with the factory defaults. Do not reset the Bridge if you want to retain these settings.

There are two ways to reset the Bridge to factory default.
 

Option 1
Press the Reset Button on your bridge for approximately ten seconds and then release it.


Option 2
Restore the defaults from the Password tab in the Bridge's Web-Based Utility.

The following steps will guide user on how to reset the bridge based on Option 2.

Step 1:
Double click the Internet Explorer web browser on your Desktop.


Step 2:
Type the Music Bridge's default IP address, 192.168.1.210 in the Address field. Then press Enter.


Step 3:
A password request page will appear. Use the default password admin and click OK.

NOTE: You can set a new password later at the Password tab.


Step 4:
This is the default page you will see in the Bridge's Web-Based Utility. Click the Password tab.


Step 5:
At the Password tab, click the Restore Factory Default button and click Apply to save the changes.

NOTE: Resetting the Music Bridge will erase all of your settings and replace them with the factory defaults. Do not reset the Bridge if you want to retain these settings.




 

Was this support article useful?

Additional Support Questions?
Search Again