text.skipToContent text.skipToNavigation

Accessing the WGA54AG’s Web-Based Setup Page Using Mac

The Linksys Wireless A/G Game Adapter (WGA54AG) has a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the WGA54AG’s web-based setup page, make sure that the Game Adapter is powered on and that it’s wired to one of the Ethernet ports on the router (1, 2, 3 or 4 ).

Accessing the Game Adapter’s Web-Based Setup Page

Step 1:
Open a web browser such as Safari.

Step 2:
Go to the Address bar and enter your Game Adapter’s IP address (“192.168.1.250” is the default IP of the WGA54AG) then press [Return].

NOTE: If the IP address of the WGA54AG has been changed, type the WGA54AG’s IP address in the Address bar instead.

The WGA54AG’s IP address can be changed by changing it on the WGA54AG’s web-based setup page.

If you forgot the WGA54AG’s IP address you can press the Reset button underneath the antenna for 30 seconds

NOTE: This procedure will reset the WGA54AG to factory defaults. Any settings on the Game Adapter will be erased. The Game Adapter’s IP address will be “192.168.1.250” and the password will be “admin” after resetting.

Step 3:
A new window will prompt for a Name and Password. Leave the Name space blank, type in the WGA54AG’s password (“admin” is the default password) in the Password field, then click Log In.



NOTE: If the password of the WGA54AG has been changed, enter the Game Adapter’s new password in the Password field instead.

The Game Adapter’s password can be changed by changing it on the WGA54AG’s web-based setup page.

 

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT