text.skipToContent text.skipToNavigation

Getting to know the Linksys E3000 High Performance Wireless-N Router

The Linksys E3000 High Performance Wireless-N Router is a simultaneous dual-band router.  It broadcasts two (2) wireless frequencies:  the 2.4 GHz and 5 GHz.  It allows you to access the Internet via a wired or wireless connection.  It has a built-in Storage Link that allows you to easily add Gigabytes of storage space to your network using USB 2.0 hard drives, or plug in a USB flash disk to access your portable data files.

The Linksys E3000's built-in media server streams music, video and photos from an attached storage device to any UPnP-compatible media adapter or player.  Furthermore, installation and use of the Linksys E3000 is easy using the Linksys Connect software which automatically installs in your computer when you run the setup CD.  It has a Guest Access feature that allows you to provide Internet access to your guests without granting them access to your local network.

Enhanced security features are also included to help protect your data and privacy while connected online.  These include:

Wi-Fi Protected Access 2 (WPA2™) security provides encryption for data on your wireless network.

Stateful Packet Inspection (SPI) firewall blocks unwanted access to your Linksys E3000.

Network Address Translation (NAT) technology protects and allows your entire network to access the Internet using a single Internet IP Address.

User-added image

Front panel

Image 1, 2, 3, 4 (Green/Blue) - The LED stays lit when the Linksys E3000 is connected to a device through one (1) of its Ethernet ports.  It flashes to indicate network activity over a certain port.  The LED lights up green when the port is connected to a Gigabit port.  It lights up blue when the port is connected to a 10/100 port.

 Wi-Fi Protected Setup™ (WPS) button - If you have client devices, such as wireless adapters that support Wi-Fi Protected Setup™, then you can use the Wi-Fi Protected Setup™ (WPS) button to automatically configure wireless security for your wireless network(s).

Image Wireless (Blue) - The Wireless LED lights up blue when the wireless feature is enabled.  It flashes when the router sends or receives data over the network.

Image Internet (Green/Blue) - The Internet LED lights up when a connection is made through the Internet port.  It flashes to indicate network activity over the Internet port.  The LED lights up green when the port is connected to a Gigabit port.  It lights up blue when the port is connected to a 10/100 port.

Image USB (Blue) - The USB LED lights up blue when a USB device is attached.  It flashes when data is being sent to or received from this device.

Image Power (Blue) - The Power LED lights up blue when the router is powered ON.  When the Linksys E3000 goes through its self-diagnostic mode every boot-up, the LED flashes.  When the diagnostic is complete, the LED is continuously lit.

Back panel

User-added image

Image USB Port - The USB port connects the router to a USB storage device as well as printers.  To learn more about connecting a USB printer to your Linksys Router, click here.

NOTE:  The Linksys E3000 USB port supplies up to 1000 mA power on devices.  It also supports FAT32 and NTFS data storing formats.  For a list of tested USB storage devices for the Linksys E3000, click here.

Image Internet - The Internet port is where you connect the Ethernet cable from your modem.  You will need to connect one (1) end of the network cable to the Ethernet port on your cable or DSL modem and the other end to the Internet port on your Linksys E3000.

Image Ethernet 1, 2, 3, 4 - Using Ethernet cables, the Ethernet ports connect the router to computers on your wired network and other Ethernet network devices.

Image Reset - There are two (2) ways to reset the router to its factory defaults.  You can either press and hold the Reset button for 10 seconds, or restore the defaults from the Administration > Factory Defaults page on the router's web-based setup page.  To know more about resetting your device, click
here.

Image Power Switch - Press the I located at the back of the router to power ON.  Press the O to power OFF the router.

Image Power - The Power port is where you connect the power adapter.

Package contents

  • Linksys E3000
  • Setup Software and User Guide on CD-ROM
  • Ethernet network cable
  • Power adapter


NOTE:  For more details about this product, visit the Linksys Support Site to browse for more troubleshooting articles, downloadable user guides or firmware updates and other support information. 


Related Articles:

How to set up your Linksys Wi-Fi Router for the first time using Linksys Connect
Comparison of Technical Specifications of Linksys Wireless-N Routers (E-Series)

Checking the wireless network name and password

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT