- Overview of the Advanced Settings on the Linksys app for Velop
The Advanced Settings feature allows you to configure the Internet Settings, Port Settings, Wi-Fi MAC Filters, and Local Network Settings of your Velop network using the Linksys app. This article provides an overview of this feature.
NOTE: To access this feature from the dashboard, tap on the menu icon at the upper left portion of your screen then go to Advanced Settings.
This section allows you to configure the Internet Settings of your Velop network.
|Connection Type||Tap to change the Connection Type. Options include Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, L2TP and Bridge Mode.|
|iPv6||Tap to change the iPv6 settings. Options include Automatic,|
PPPoE, and Passthrough.
|Additional Settings||Tap to change the MTU size and configure the MAC Address Clone.|
Use the Port Settings screen to add rules to send traffic from specific ports or ranges of ports to specific connected devices. You can also configure your Velop to remember which ports a device uses to send data so data returning through that port is sent to that device.
|Single Port Forwarding||Tap to configure Single Port Forwarding, edit existing rules, disable a rule, and delete a rule.|
NOTE: All three sections under Port Settings will have an option to Add a Rule.
|Port Range Forwarding||Tap to configure Port Range Forwarding, edit existing rules, disable a rule, and delete a rule.|
|Configure Port Range Triggering in the section shown below.|
Wi-Fi MAC Filters
Tap to configure the Wi-Fi MAC Filters of your device.
|Wi-Fi MAC Filters||Tap to change the Wi-Fi MAC Filter Status.|
If the Off option is not selected, enabling the Wi-Fi MAC Filters would either function as Allow Access or Deny Access.
Local Network Settings
Configure the local network settings of your Velop network.
|Router Details and|
|You can change the IP address settings of your Velop network on Router Details. This section also allows you to change the DHCP Server settings of your Velop network.|
|DNS Settings||Change the DNS Settings of your Velop network. By default, Auto is selected. |
Tap to select Manual and scroll down to make the necessary DNS changes.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.