text.skipToContent text.skipToNavigation

Setting up the Linksys EA series routers using an Android device

The Linksys app allows you to monitor and manage your Linksys Smart Wi-Fi Routers.  With the Linksys app, you can access your home network anywhere, anytime.

This article will teach you how to set up Linksys EA series routers using an Android™ device.  If you're using an iOS device, click
here for instructions.  For setting up your router using the Smart Setup Wizard, click here.

Before you begin:
  • Have your Linksys default Wi-Fi name and password ready. The default Wi-Fi name and password of the router are located on the bottom of the router or in the quick start guide.
  • Make sure your internet access is working.
  • Power OFF your modem.  If you are replacing an existing router, make sure to disconnect it and move it out of the way.  After that, connect your modem to the internet port of your new router using an ethernet cable then plug the power adapter of both your modem and your new router.

NOTE:  Images may vary depending on the device you are setting up.  The steps below will show the set up of EA7500 v3. 
 
Step 1:
Connect your mobile device to your router's Wi-Fi.
  
Step 2:
Launch the Linksys app, then select Launch setup.

 
User-added image

Step 3:
When prompted to turn ON Bluetooth®, tap on I would rather set up without Bluetooth.

 
User-added image

Step 4:
Tap Agree to the Terms and Conditions.

 
User-added image 

Step 5:
Select Standard Wi-Fi Router when prompted.
 
User-added image

Step 6:
Make sure you complete all the steps as instructed and tap Find My Router once done.
 
User-added image
 
Step 7:
Tap Continue.

 
User-added image

Step 8:
Check the boxes and select Next.
 
NOTE:  If you want to manually configure your router, click the Manual configuration link at the bottom instead.
 
User-added image

Step 9:
It is recommended to leave automatic updates turned on.  You can always change this later from a desktop browser.  Tap Next.
 
User-added image

Step 10:
Customize your Wi-Fi settings then tap Next.
 
QUICK TIP:  You can tap on Give all my Wi-Fi bands the same name if you want to use a single name for both the 2.4 GHz and 5 GHz bands.
 
User-added image

Step 11:
Make sure to connect to your new Wi-Fi name when prompted.  Setup will resume after connecting to your new Wi-Fi name.  Then tap Next.
 
User-added image

Step 12:
Create an admin password for your router in the field and create a password hint.  Scroll down then tap Next

 
User-added image

Step 13:
Take note your router settings, scroll down then tap Next.

 
User-added image
 
Step 14:
Create a Linksys server account by tapping Next.  If you already have an account, tap Sign In instead.
 
User-added image
 
Step 15:
Enter your Email Address and Password then tap Log in.  Tap Create an Email Login if you don't have an account.
  
User-added image

Step 16:
Tap OK.

User-added image

You should now have successfully set up your Linksys router.

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT