Light behavior of the Linksys MR75WH

User-added image

The Linksys Hydra Pro 6E, MR7500 has
two front panel indicator lights and lights on the back panel that indicate the activity and connectivity of your devices to the router.

NOTE:  The Power/Status, and
Wi-Fi Protected Setup™ (WPS) lights will not be affected by the Activity Lights setting for the router.

 


Front Panel

User-added image

Power/Status Light

 
Light ActivityStatus
Blue (blinking)Starting up.  Wait for the router to finish starting up.
PurpleReady for setup.  Open the Linksys app to complete the setup.
Purple (blinking)Setup in progress.  Follow the instructions in the Linksys app.
BlueConnected to the internet.  The router is online.  Everything is good.
RedNo internet from the modem.  Check with your internet service provider (ISP) for service interruptions.
Red (blinking)Disconnected.  Make sure that the router is firmly connected to the modem.



















 


WPS Light 

Press the WPS button on the side of the router to pair your device.

 
Light ActivityStatus
OFFNo WPS activity.
White (blinking)WPS pairing is in progress (blinks for up to 2 minutes).
Orange (blinking)WPS error (blinks for 1 minute).
White (solid)WPS pairing is successful (goes OFF after 5 seconds).










 


Back Panel

User-added image

 
Port/Light ActivityStatus
Internet port (two lights):
 
  • Green (link)
  • Yellow (activity)
OFF - No physical link on the Internet port.
Green (solid) - Physical link is up on the Internet port.
Yellow (blinking) - Data is transmitting through the Internet port.
Ethernet/LAN ports (two lights):
 
  • Green (link)
  • Yellow (activity)
OFF - No physical link on the LAN port.
Green (solid) - Physical link is up on the LAN port.
Yellow (blinking) - Data is transmitting through the LAN port.

Was this support article useful?

Additional Support Questions?
Search Again