text.skipToContent text.skipToNavigation

Checking the MAC Address of the WUMC710

Access to your wireless home network can be filtered to allow or disallow select devices by using the Media Access Control (MAC) Address of the wireless device.  The MAC address is a string of number that consists of 12 characters that is unique to each device.

MAC Filtering is a security feature of your Linksys device that can either prevent or allow specific MAC Addresses to be connected to your wireless router.  If your Linksys router is configured with this feature, you will need to enter the WUMC710’s MAC Address into its MAC Filter table.

This article will help you on how to check the MAC Address of the WUMC710.

Step 1:
Access the WUMC710’s web-based setup page.  For instructions, click here.

Step 2:
When the page appears, click Status.

Step 3:
The MAC Address will then be displayed on the Status tab page.  Write this down as reference for future use.

After checking the MAC Address of the WUMC710, you can now enter it into the Linksys Smart Wi-Fi Router’s MAC Filter table.  To do this, follow the steps below:

Step 1:
Access the Linksys Smart Wi-Fi Router's local access interface through a browser like Safari or Internet Explorer.  To learn more, click here.

Step 2:
Enter your device’s MAC Address in the MAC Filtering tab of your Linksys Smart Wi-Fi.  Click here for instructions.

NOTE:  If you’re using the MAC Filter feature of the Linksys router with a WUMC710 on the network, you need to place the MAC Address and Device Mac Address of the WUMC710 in the router’s MAC Address list.

Connecting the WUMC710 to the network

The Linksys WUMC710 allows wired Ethernet-based devices to connect to your network and access the Internet wirelessly.  For more information about this, click here.
 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT