- Configuring wireless MAC Filter using your Linksys cloud account
Media Access Control (MAC) Address is a unique identifier assigned to each network adapter or Network Interface Card (NIC) of a computer or device. The MAC Filtering feature of your Linksys Smart Wi-Fi Router will allow or prevent access to the network using this unique identifier.
Why do you need it?
The MAC Filter feature is a wireless security option that you can use instead of setting up a wireless password to protect your network. On your Linksys cloud account, you can enable MAC Filters in the MAC Filtering tab of the Wireless tool.
NOTE: If you enable this option, the Wi-Fi Protected Setup™ (WPS) feature will be disabled.
This article will guide you in configuring the wireless MAC Filter feature of your Linksys Smart Wi-Fi Router using your Linksys cloud account.
Access your Linksys cloud account. To learn more, click here.
NOTE: If you haven’t set up a Linksys cloud account yet, click here to know how to create, activate and associate your account to your Linksys Smart Wi-Fi Router.
On the left navigation pane, click the Wireless tool under Router Settings.
Click the MAC Filtering tab.
Tick the Enabled box.
A pop-up that says, Enabling MAC filtering will disable WPS. Do you want to continue? will appear. Select Yes to proceed.
Select among the Filter options that you want to set up:
• Deny access for the listed MAC addresses – This option is used if you want to create a list of MAC Addresses that cannot access your network. Any device whose MAC Address is listed will not be permitted to connect to your network.
• Allow access for ONLY the listed MAC addresses – This option is used if you want to limit access to your wireless network to certain devices. Only the devices whose MAC Addresses are listed will be allowed to connect to your network. All other devices will be denied.
NOTE: In the image below, the Deny access for the listed MAC addresses option is selected.
To specify the MAC Address that you want to deny or allow an access to your network, click Add MAC Address in the MAC Filter List section.
Enter the MAC Address of the computer or device that you want to deny or allow an access to your network and then click Save.
NOTE: If you want to know how to check your device's MAC Address, go to the Linksys Smart Wi-Fi Tools navigation menu > Device List > click on your device name. It will display the details such as its name, manufacturer, model, IP and MAC Address. Devices with Offline status will not display these details.
NOTE: You can Edit / Delete the MAC Address you have entered.
QUICK TIP: You can add up to 32 MAC Addresses that you want to allow or deny access to your network. All MAC Addresses that will be added on the list will have the same access restriction depending on what Filter option you have selected in Step 4.
Click Apply > Ok to save the changes.
Connecting wireless electronic devices
Today, most of our devices at home are connected wirelessly to the network. Through your Linksys Smart Wi-Fi Router, you can experience ease in connecting your wireless devices. To learn more about this, click here.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.