text.skipToContent text.skipToNavigation

Identifying the Advanced Wireless Settings of a Linksys VOIP Router

The Advanced Wireless Settings on a Linksys wireless router allows you to customize different options and optimize your wireless network’s performance.  Linksys, however, does not recommend changing the advanced wireless settings of the router.  The current settings have been configured to optimize the router's wireless performance.
 
Accessing the Advanced Wireless Settings
 
Step 1:
Access the router’s web-based setup page. For instructions, click here.

 
Step 2:
When the router’s web-based setup page appears, click Wireless then click Advanced Wireless Settings.

 
 
Step 3:
The Advanced Wireless Settings window should appear. Here are some details:

 

 
  • Preamble Type
    The preamble defines the length of the CRC block for communication between the router and the roaming network adapter.  High network traffic areas should use the shorter preamble type.
  • Authentication Type
    The default is set to Auto, which allows either Open System or Shared Key authentication to be used.  For Open System authentication, the sender and the recipient do not use a network key (wireless password) for authentication.  For Shared Key authentication, the sender and recipient use a network key for authentication.  If you want to use only a Shared Key authentication, select Shared Key.
  • CTS Protection Mode          
    The default value is set to Auto. When set to Auto, a protection mechanism will ensure that your Wireless-B devices will connect to the Wireless-G Router when many Wireless-G devices are present.  However, the efficiency of your Wireless-G devices may be decreased.
  • Beacon Interval      
    This value indicates the frequency interval of the beacon.  A beacon is a packet broadcast by the router to keep the network synchronized.
  • DTIM Interval           
    This value indicates the interval of the Delivery Traffic Indication Message (DTIM).  A DTIM field is a countdown field informing PC’s in the network of the next window for listening to broadcast and multicast messages.  The default value is set to one. 
  • Fragmentation Threshold
    This value indicates how much of the router's resources are devoted to recovering packet errors.  The default value is 2347 and should remain as such unless you encounter inconsistent data flow.  In the event you encounter inconsistent data, only minor modifications are recommended.
  • RTS Threshold          
    This value should remain at its default settings of 2346.  Should you encounter inconsistent data flow, only minor modifications are recommended.
NOTE: The features may vary depending on the model number of your router
 
 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT