text.skipToContent text.skipToNavigation

Getting to know the Linksys High Power PoE Injector, LACPI30

The Linksys High Power PoE Injector, LACPI30 offers a quick and easy setup with Plug-n-Play installation, provides Power over Ethernet (PoE) capabilities to a Provider Edge (PE) device and to your non-PoE network by simply connecting it to your existing network.  It is easy to configure and operate allowing you a fast and convenient access to your files. 
It also reduces the wiring cost of AC power by using a standard CAT5 cable to carry both power and data to Power over Ethernet devices such as cameras and access points, up to 100 meters away.

Product Overview


 PoE LED (Green) - Indicates the PoE/DATA port delivering power.
  • OFF - The PoE/DATA port is not delivering power.
  • Solid Green - The PoE port is delivering power.
 System LED (Blue) - The LED lights up and stays solid when the switch is powered ON.
 PoE/DATA port - This port supports 10/100/1000 base Ethernet and can transmit power and data at the same time or either. 
 DATA port - This port supports 10/100/1000 base Ethernet and ONLY transmits data. 

Power Socket - AC power in, to connect the power cord to a power source.
  • Convenient access to Power
Supplies power to PoE Wireless Access Points, IP Cameras and other PoE Powered Devices (PDs) through the Ethernet cable.
  • Speed and power performance
Offers Gigabit speeds with IEEE 802.3at (PoE+), which can provide power for up to 30 Watts.
  • Plug & Play Installation
Quick and easy set up - no software required.

  • One Gigabit  Data Port - to connect to a  switch  or hub
  • One  Gigabit with PoE port  - To connect to a Powered Device (PD)
  • Internal Power supply - AC power 100-240 V AC at 50-60 Hz
  • Indoor usage only
  • The minimum power cord length is five (5) feet

All the ports must provide full line rate and forwarding rate of 64 B frames at 1.488 Mpps for 1000 M port, 0.1488 Mpps for 100 M and 0.01488 Mpps for 10 M port.
Enclosure Type

The Injector is built with a metal chassis.

Wall Mounting
The Injector is built for Wall-mounting purposes.

The PoE Injector has two (2) years limited warranty.

Package Contents
  • LACPI30 Gigabit High Power POE Injector
  • Power cord
  • Quick Installation Guide
  • Wall Mount Kits
  • 4x Foot pads 

Related Articles:

Connecting the Linksys High Power PoE Injector, LACPI30 on devices
Linksys High Power PoE Injector, LACPI30 specifications

Was this support article useful?

Additional Support Questions?

Search Again