text.skipToContent text.skipToNavigation

Getting to know the Linksys E8400 AC2400 Dual-Band Wireless Router

The Linksys E8400 AC2400 Dual-Band Wireless Router is an 802.11ac wireless router.  This is a 4x4 dual-band router with one (1) USB 3.0 and one (1) eSATA / USB 2.0 combo port.  It comes with embedded Setup Wizard for easy installation.   
 
User-added image

Product Features
  • Classic web-based setup page
  • Embedded Setup Wizard
  • Up to 600 Mbps for 2.4 GHz and up to 1733 Mbps for 5 GHz
  • Beamforming technology
  • Guest network
  • Two (2) USB ports (USB 3.0 and a combo port eSATA / USB 2.0)
  • Four (4) gigabit ports
  • Wireless security
  • Four (4) adjustable antennas (detachable)
  • Dual-core processor 1.4 GHz
Adjustable External Antennas
 
User-added image

This router is shipped with four (4) adjustable external antennas.  These should be connected to the router before turning the router ON.  To connect the antennas, twist the antenna connector clockwise onto the antenna port on the router.
 
NOTE:  In order to connect the antennas, make sure you hold them by the end of the connector as you are twisting them in
.

User-added imageEthernet / LAN 1-4 (Green)
 
These Ethernet ports connect the router to the computers and other devices on your wired network using Ethernet cables.


User-added image Internet (Green)
 
Using an Ethernet cable, the Internet port connects the router to your Internet connection, which is typically a Cable or Digital Subscriber Line (DSL) modem.


User-added image Wi-Fi Protected Setup™ (WPS) button
 
If you have client devices, such as wireless printers, that support Wi-Fi Protected Setup™ (WPS), you can press the WPS button to automatically configure wireless security for your wireless network.  To know how to connect devices using the WPS feature, click
 here.

User-added image USB1 Port – USB 3.0 
User-added image USB2 / eSATA Port – USB 2.0 combo port
 
The two (2) USB ports can be used for virtual printing and storage.

User-added image Reset

This button allows you to reset the router to its factory defaults.  To do this, press and hold the Reset button for approximately 10 seconds.

User-added image Power

The Power port connects to the power adapter that comes with your router.

User-added image
Wi-Fi Button and Indicator 

Press and hold the Wi-Fi button for three (3) seconds to enable/disable the wireless function.  When enabled, the Wi-Fi indicator lights up.

User-added image
Power Indicator

The LED is solid while power is connected.  It blinks slowly during boot up, firmware upgrades and factory reset.

User-added image Power switch

Press | (ON) to turn ON the router.

LED Behavior

 
LEDColorsActivityDescription
Power/WPSGreenOFFPower OFF
Flashing (0.7 Hz)Booting / system self-test / firmware upgrade
Flashing (1.0 Hz)WPS in progress (up to two (2) minutes)
Flashing (2.0 Hz)WPS error / WPS session overlaps for two (2) minutes, then back to solid green
SolidPower ON / device is ready
LANGreenOFFNo Physical link on LAN port
Green SolidPhysical link is up on LAN port
Green FlashingData is transmitting through LAN port
InternetGreenOFFNo Physical link on Internet port
Green SolidPhysical link is up on Internet port
Green FlashingData transmitting through Internet port

 
Minimum System Requirements
 
Operating System
  • Works with all Windows® and Mac OS® desktop operating systems using a supported browser.
Internet Browser
  • Latest versions of Internet Explorer®, Firefox® and Chrome™ for Windows® 
  • Latest versions of Safari®, Firefox and Chrome for Mac®


Related Articles:

Linksys E8400 AC2400 Dual-Band Wireless Router Frequently Asked Questions
Linksys E8400 AC2400 Dual-Band Wireless Router System Specifications

Setting up the
Linksys E8400 AC2400 Dual-Band Wireless Router using the embedded Setup Wizard

Related Video:

Setting up the Linksys E8400 AC2400 Dual-Band Wireless Router using the Setup Wizard (VIDEO)

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT