Upgrading the firmware of the Linksys RE6350 range extender

Upgrading the firmware of your Linksys RE6350 AC1200 Wi-Fi Range Extender improves its operational functions and fixes software issues found in the previous version.  

To upgrade the range extender’s firmware, follow the steps below:

 
Step 1:
Open a browser to log in to the web-based setup page of your range extender.

NOTE:  You must be connected to the Wi-Fi® name of the range extender.    

QUICK TIP:  There are three methods to log in:

 
​A.  Enter "http://extender.linksys.com" in the Address bar.
 
B.  Enter "http://RE6350" for Windows® or enter "http://RE6350.local" for OS X® in the Address bar.
 
NOTE:  If you have changed your Linksys RE6350's name, then use that custom name instead (e.g. "http://MyAP" or “http://MyAp.local”).
                       
C.  Enter the range extender’s IP address.​
 
NOTE:  If the range extender does not detect a DHCP server, the default IP address is 192.168.1.1.  Otherwise you will need to look up your range extender’s IP address in your router's DHCP Client Table.  To know how to do this using a Linksys Wi-Fi Router, click here.  If you are using a Linksys Smart Wi-Fi Router, click here.

Step 2:
Enter your range extender's admin Password.  If you have changed your password, enter that instead.  Otherwise, enter the default password “admin” in the field, then click Login.

 
User-added image
 
Step 3:
On the web-based setup page, click Firmware Upgrade under Administration.

User-added image

Step 4:
There are two methods in upgrading the range extender's firmware: Automatic update and Manual update.

 
Automatic update
 
The range extender will automatically detect if there is a new available firmware.  If there is, click the Update now button to start upgrading the firmware.

User-added image
 
For automatic update, check the Auto update range extender when improvements are available checkbox. 

User-added image

Manual update

IMPORTANT:  Make sure you have downloaded the firmware file from the Linksys RE6350's Download page first.

To manually update the firmware, click the Select a file button and select the firmware file that you have downloaded, then click Open.  To start upgrading the firmware, click the Start Upgrade button. 

User-added image
 
The progress of the upgrade process will be shown on the same page.  Make sure the upgrade process is not interrupted.

Step 5:
Click User-added image to apply the changes.

Was this support article useful?

Additional Support Questions?
Search Again