text.skipToContent text.skipToNavigation

Attaching or releasing Linksys power adapter modules

Some power adapters for Linksys devices have different adapter modules for regional power sockets.  The mechanisms for attaching or releasing the modules are different depending on the model of the power adapter.  This article will teach you how to attach or release the modules to or from your power adapter.  Check the module socket design on your power adapter and select from below for the specific instructions.

Slide-in type
Snap-in type
 
Slide-in type
 
Attaching the module
 
Step 1:
Align the adapter module with its back side (opposite the plug side) facing the socket side on the power adapter.
 
User-added image

Step 2:
Slide the module in until you hear the lock click.
 
User-added image
You’ve now successfully attached the module into your power adapter.
 
Releasing the module
 
Step 1:
Press and hold your thumb firmly on the lock release button
 
User-added image

Step 2:
Using your other hand, grip the module firmly and slide it out to the opposite direction of the release button.
 
User-added image
You have now successfully released the module from the power adapter.
 
Snap-in type
 
Attaching the module
 
Step 1:
Lock the hook edge behind the module socket onto the power adapter.
 
User-added image

Step 2:
Push the opposite edge towards the socket until you hear the lock click.
 
User-added image

You’ve now successfully attached the module into your power adapter.
 
Releasing the module
 
Step 1:
Locate the open / release button below the socket on the power adapter.
 
User-added image

Step 2:
Press the button firmly until the module pops out.
 
User-added image

You have now successfully released the module from the power adapter.
 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT