Australia
Hong Kong
Indonesia
India
China
Singapore
Thailand
Vietnam
Philippines
New Zealand
Malaysia
Korea
How to disable the Wi-Fi (Belkin)
This article will walk you through general instructions on how you can disable the Wi-Fi on your Belkin router.
NOTE: The steps and instructions may vary depending on your router/gateway’s model. Contact your device’s manufacturer for support.
Before you begin:
NOTE: The steps and instructions may vary depending on your router/gateway’s model. Contact your device’s manufacturer for support.
Before you begin:
- Make sure that the computer you use to access the web-based setup page of your router or gateway is either wired to it directly or is connected to it via Wi-Fi.
- Make sure to know your login credentials as these differ for every manufacturer. Contact your device’s manufacturer for support.
Step 1:
Launch a browser.
Step 2:
Enter "https://192.168.2.1" in the address bar and press [ENTER]. If it doesn't work, check your router's IP address.
Step 3:
Log in to the router.
Launch a browser.
Step 2:
Enter "https://192.168.2.1" in the address bar and press [ENTER]. If it doesn't work, check your router's IP address.
Step 3:
Log in to the router.
-
Web interface - Click Login at the top-right corner and enter your router's admin password. If you have not set a custom password, just leave the Password field blank then click Submit.
-
Dashboard - You will be asked to enter the administrator password you created upon setup. Click Let me in! to continue. If you have not set a custom password, you should be able to log in right away.
Step 4:
On the web-based setup page, look for Wireless or Advanced Settings.
-
Web interface - Under Wireless, click Channel and SSID.
-
Dashboard - Go to Advanced Settings > WiFi.
-
Wireless-G router - Click on Wireless and select Disable.
Step 5:
Disable the Wi-Fi.
Disable the Wi-Fi.
-
Web interface - Click the dropdown menu for Wireless Mode, then select OFF.
-
Dashboard - Click the dropdown menu for Wireless Mode and select Off. You must separately do this for each wireless band.
-
Wireless-G routers - Click on the Wireless Mode drop-down menu and select Off.
Step 6:
Save your changes. Click on Apply Changes for the web interface. For Dashboard users, click Save.
Save your changes. Click on Apply Changes for the web interface. For Dashboard users, click Save.
