text.skipToContent text.skipToNavigation

Overview of the Wi-Fi settings for the Linksys Dual-Band WiFi Router

The Linksys Dual-Band WiFi Router lets you enjoy the power of Wi-Fi technology.  It delivers enhanced speed, range, and security for all your networking needs which allows you to swiftly stream HD videos, surf, email, play games online, browse, and chat.

The Wi-Fi
settings on the web interface of the Linksys Dual-Band WiFi Router
 allows you to configure and protect your network from security vulnerabilities through managing your Wi-Fi credentials.  To access this page, log in to the router's web interface.  For instructions, click here.  Then, go to Configuration > Wi-Fi.

Overview of the Wi-Fi page
 
Feature
Description
Basic Wireless Settings

This page allows you to configure the Wi-Fi settings of your network.

NOTE:  The options will vary depending on the model of your router.

 
User-added image
 
Wi-Fi Protected Setup

The Wi-Fi Protected Setup™ (WPS) feature cannot be used when your router’s Broadcast SSID is disabled, any of your radio bands are disabled, or if MAC Filtering is enabled.
 
User-added image
 
Wireless Security

You can configure your Wi-Fi security settings in the Wireless Security page.
 
User-added image
 
Guest Access

You can enable or disable the Guest Network on the Guest Access page.  The Guest Password consists of four to 32 characters.  Click on Change to update the Guest Password.  Once you're done configuring your Guest Network, click Save.

The guest name uses the main Wi-Fi name with “-guest” appended to the end.

NOTE:  The settings may vary depending on the model of your router.

User-added image
 
Wireless MAC Filter

Click on the box before the Wireless MAC Filter to enable or disable it.  Then, choose whether this will prevent or permit the computers listed on the MAC Address Filter List to access your wireless network.  You can enter up to 32 MAC addresses or click on the Wireless Client List to register the MAC address of the device that is already connected to your wireless network.
 
User-added image

Then, click the Save button found at the bottom part of the page when you’re done.
 
User-added image

The Wireless Client List provides the following options:
 
  • To Sort by – Clicking on the dropdown menu sorts the clients in order of IP address, MAC address, interface, or client name.
  • Save to MAC Address Filter List – Clicking the box before HTTP of the selected client adds it on the list.
  • Add – This adds the MAC address of the selected client on the MAC Address Filter List.
  • Refresh – This retrieves the updated list of clients.
  • Close – This exits the window.
 
User-added image
 
For step-by-step instructions on configuring the Wireless MAC Filter, click here.
 
Beamforming

The Beamforming feature of your router is enabled by default.  To disable or enable it, click on the box and then Save.

NOTE:  The options may vary depending on the model of your router.

User-added image
 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT