text.skipToContent text.skipToNavigation

Connecting devices using the WPS on the Linksys app

Wi-Fi Protected Setup™ (WPS) securely adds devices to your WiFi without having to enter a network name and password.  With the Linksys app, you can easily connect your devices to the network using WPS.

NOTE:  The device that you want to connect must also support WPS.  The Linksys app supports Android™ and iOS devices only.

This article will guide you on how to connect a device using WPS in the Linksys app.  Follow the instructions below depending on your device's operating system.


For iOS
For Android

For iOS
 
Step 1:
Connect your mobile device to your router's WiFi then open the Linksys app.
 
Step 2:
Tap Manage Your Wi-Fi.
 
sf203478-001_en_v5.png

Step 3:
You will be prompted to log in using your Linksys cloud account.  Enter the necessary credentials and tap Log in

NOTE:  You can also choose to log in using your Router Password.

 
sf203478-002_en_v5.png

Step 4:
On the Dashboard, tap the menu icon on the upper-left corner.
 
sf203478-003_en_v5.png

Step 5:
Tap Wi-Fi Settings.
 
sf203478-004_en_v5.png
 
Step 6:
Scroll down and select Connect a Device With WPS.
 
sf203478-005_en_v5a.png
 
Step 7:
Toggle the WPS switch to turn it ON and tap Connect.
 
sf203478-006_en_v5.png

NOTE:  Be sure to push the WPS button within two minutes to connect your device. 
 
sf203478-007_en_v5.png
 
Step 1:
On your mobile device, tap the Linksys app.
 
Step 2:
Log in to the Dashboard with your Linksys cloud account or you can also tap on Log in with Router Password.  For complete instructions on how to access your Linksys Smart WiFi Router using the Linksys app, click here.  To access your Linksys Intelligent Mesh, click here.

Step 3:
On the Dashboard, tap Wi-Fi.
 
sf203478-008_en_v5.png

NOTE:  You may also tap the menu sf203478-009_en_v5.png icon at the top-left side of the Dashboard to access Wi-Fi Settings.

Step 4:
Tap the Connect a Device With WPS option.
 
sf203478-010_en_v5.png

Step 5:
Tap the Connect button to start WPS pairing.  Make sure you do the same on the device you want to connect to the network.  Once you press the Connect button, a 2-minute countdown begins.
 
sf203478-011_en_v5.png

When the device is found, the device name will appear on Devices.  
 
sf203478-012_en_v5.png

When the slider button is set to OFF, WPS will also be turned OFF on your router or node and the following message will display.
 
sf203478-013_en_v5.png

NOTE:  WPS is NOT available when your security mode is set to WEP, MAC filtering is ON, or Broadcasting is OFF.

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT