How to log in to the Linksys Mesh dashboard while on Bridge Mode

When on Bridge Mode, your node will not have its own separate network. All nodes and client devices connected to your WiFi or the existing modem router (gateway) will be on the same network and can communicate with other devices within the network.

This article will help you log in to your Linksys Mesh system while your Linksys network is set to bridge mode. 

 

Log in through the Linksys app

Steps and images may vary depending on the operating system of your mobile device.

1. Connect your mobile device to your Linksys WiFi and launch the Linksys app.

2. Tap on Manage Your Wi-Fi for iOS or Log in for Androidâ„¢.


 
iOSAndroid
sf49606-001_en_v4.pngsf49606-002_en_v4.png


3. You will receive a prompt to log in using your Linksys cloud account. Enter the required credentials and tap on Log in.

 
iOSAndroid
sf49606-003_en_v4.pngsf49606-004_en_v4.png


Alternatively, you can log in using the Router Password option.

4. You will be redirected to the dashboard on bridge mode.

 
iOSAndroid
sf49606-005_en_v4.pngsf49606-006_en_v4.png


Some features will be disabled when on bridge mode.

You should now have successfully accessed the dashboard while on bridge mode.

 


Log in with a desktop browser

There are two ways to log in using a desktop browser. You can either log in to the LinksysSmartWiFi.com website using your Linksys cloud account or log in by IP address.

 

Log in through LinksysSmartWiFi.com 

1. Connect a desktop computer to your Linksys WiFi.

2. If you have a Linksys cloud account, open a web browser, type in "linksyssmartwifi.com" in the Address bar, enter your Linksys cloud account credentials, and click Sign In.

 

sf49606-007_en_v4.png


You have now logged into your Linksys dashboard. 
 

sf49606-008_en_v4.png


Log in by IP address

1. First determine the IP address of the parent router by
logging into the Linksys app. 

2. Tap on NODES for iOS or Nodes for Android.

 
iOSAndroid
sf49606-009_en_v4.pngsf49606-010_en_v4.png


3. Tap on the first node or router on the list.
 

sf49606-011_en_v4.png


4. Write down the LAN IP address.

sf49606-012_en_v4.png

5. Launch a browser on your desktop, enter "https://x.x.x.x" (x.x.x.x is the IP address of the router) in the Address bar, and hit [ENTER].

6. Click on the mobile image.


sf49606-013_en_v4.png

7. Enter your router password then click Sign In.

sf49606-014_en_v4.png

The password is case-sensitive. If you have forgotten the password or haven’t set one, click on Reset password to reset it and create a new one.

8. You will be redirected to the dashboard. You should now have successfully accessed the dashboard while on bridge mode.

Some features will be disabled in bridge mode.


sf49606-015_en_v4.png

 

Was this support article useful?

Additional Support Questions?
Search Again