Mounting the Linksys LAPAC1300CE

The Linksys LAPAC1300CE AC1300 Cloud Outdoor IP67 Access Point is perfect for outdoor deployments and comes with a mounting ring and screws for wall or pole installation

IMPORTANT:  Improper or unsecured mounting could result in damage to the device or personal injury.  Linksys is not responsible for damages caused by improper mounting or installation.

Wall mounting

 
User-added image
 
Step 1:
Attach the included antennas.  Make sure to match them to their corresponding connectors on the access point.

Step 2:
Find the desired location for the access point and use the provided template to drill two holes.

Step 3:
Insert the anchor bolts, screw in the provided screws, and hang the access point on the screws.

Step 4:
Connect an ethernet cable from a PoE device to the access point to supply power to it.


Pole mounting
 
User-added image
 
Step 1:
Attach the included antennas to the access point.  Make sure to match them to their corresponding connectors on the access point.

Step 2:
Place the access point in the desired location then secure the access point to the pole using the included mounting ring.

Step 3:
Connect an ethernet cable from a PoE device to the access point to supply power to it.

Was this support article useful?

Additional Support Questions?
Search Again