Overview of the Engineer page of the Linksys FGMM1000 and FGMM601

The Engineer page in the web interface of the Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router is only available when you log in as an administrator.  To access this page, click here for instructions.  Then, go to Engineer.

NOTE:  The Engineer settings are only available under the administrator login.  If you are not the administrator of this router, contact the administrator.

 
User-added image

Overview of the Engineer page
 
Feature
Description
System log

Capture syslogs in the System log page.
 
User-added image

Scroll down the page to capture and download the logs.
 
User-added image
 
Configuration

On the Configuration page, click on Edit to configure the settings as needed.

User-added image
 
Super Console

The Super Console window allows you to send and run commands on the router.  Make sure to click on APPLY to save your changes.

User-added image
 
Cell Selection

Configure the Frequency Settings for LTE and NR bands under the Cell Selection page.  Select the bands to be used or you may Check All or Uncheck All the boxes when applicable.  Click on Apply to save changes.

NOTE:  Cell selections will vary by the SIM card carrier.

User-added image
 
 

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋