How to Back up and Restore the settings of Linksys FGMM1000 and FGMM601

The Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router features Backup & Restore that allows you to back up all configurations made to the router, and restore your previous configuration using the backup configuration file when the router is reset to factory default settings.  This will save you time by not going through the process of reconfiguring the router manually.

This article will guide you on how to back up and restore the settings of your router.  Follow the steps below to know how.


Backup configuration
Restore configuration

Backup configuration
 
Step 1:
Log in to the router’s web interface.  For instructions, click here.

Step 2:
Go to Administration and choose Restore/Backup under Device Management.

Step 3:
On the Backup & Restore page, click on BACKUP.

 
sf318805-001_en_v2.png

Step 4:
A new window will prompt you to save the configuration file in .en file extension.  If you want to change the file name, you may do so.  Click Save.

QUICK TIP:  You may save the file to your Desktop to easily search for it later.

 
sf318805-002_en_v2.png
 
Restore configuration
 
Step 1:
Log in to the router’s web interface.  For instructions, click here.

Step 2:
Go to Administration and choose Restore/Backup under Device Management.

Step 3:
On the Backup & Restore page, click on Upload restored configuration.

 
sf318805-003_en_v2.png

Step 4:
Select the backup configuration file you saved.

Step 5:
Click on RESTORE to start the process.
    
NOTE:  When the restore process is complete, the router will automatically reboot and disconnect from the internet.  The devices connected to your router will also disconnect.  Once the backup configuration file is successfully restored, the devices will reconnect only if the backup settings match the current settings.

 
sf318805-004_en_v2.png

You have successfully performed the backup and restore process for your router.

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋