Upgrading the firmware of the Linksys FGW5500

Updating the firmware of the Linksys FGW5500 will keep its features current and fix many performance issues. This article will show you how to upgrade the firmware of your router.

Using the Firmware Over-The-Air (FOTA) upgrade
Manually upgrading the router’s firmware

Using the Firmware Over-The-Air (FOTA) upgrade

Your router is automatically set to receive automatic updates over the air at nighttime, however, you can also click to check if a new version is available and proceed to update the firmware.

1. Access the Linksys FGW5500's web interface.

2. On the left side of the dashboard, click on Management.

3. Click on Software.

 
sf469970-001_en_v5.png

4. Click on Check New Version. If a new version is available, proceed to update the firmware.
 
sf469970-002_en_v5.png

DO NOT POWER OFF THE ROUTER while the upgrade is in progress. All three lights on the router will turn blue in a chasing pattern. The router will reboot once the update is complete. Wait until the lights stop flashing, which may take a few minutes.

Your router is ready to use again once the middle and bottom lights turn solid and you will see your WiFi name broadcasting again.
 


Manually upgrading the router’s firmware

There may be some occasions where you may need to manually update the firmware. Automatic updates via FOTA are highly recommended. However, should you need to manually update the firmware, follow these steps.

1. Download the latest firmware of your Linksys FGW5500 and save it on your computer.

2.
Access the Linksys FGW5500's web interface.

3. On the left side of the dashboard, click on Management.

4. Click on Software.

 
sf469970-003_en_v5.png

5. Click Browse then select the firmware file that you have downloaded.
 
sf469970-004_en_v5.png

6. Click Install Software. The Upgrading window will be shown below and then the reboot process will start to let the change take effect.

DO NOT POWER OFF THE ROUTER while the upgrade is in progress. All three lights on the router will turn blue in a chasing pattern. The router will reboot once the update is complete. Wait until the lights stop flashing, which may take a few minutes.

Your router is ready to use again once the middle and bottom lights return solid and you will see your WiFi name broadcasting again.

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋