Changing the WiFi Settings of the Linksys FGW5500

This article will show you how to change your WiFi settings of the Linksys FGW5500.

Before you begin:
 
  • Changing your WiFi settings will disconnect all WiFi devices from your router. You must reconnect them using the new settings.
  • The password should not have consecutive identical characters. 
  • The minimum length of a password is 10 and this should meet all the following four complexity rules:

     

    • At least one uppercase character
    • At least one lowercase character
    • At least one number
    • At least one special character (punctuation or space)
 
 
1. Access the Linksys FGW5500's web interface.

2. On the left side of the dashboard, click on WiFi.

3. Click on Basic.
 
sf48096-001_hk_v3.png
 
4. Enter your preferred WiFi name in the Network Name(SSID) field.

5. Select an Encryption.
 
sf48096-002_hk_v3.png
 
If you choose WPA3-SAE + AES, keep in mind that all devices support WPA3™ and these devices will not be able to connect. Use the first or second option instead.
 
6. Enter your preferred WiFi password in the Password field.
 
sf48096-003_hk_v3.png
 
By default, both 2.4 GHz and 5 GHz radios use the same WiFi credentials. If you want to give your 5GHz WiFi a unique name, click on the 5GHz WiFi to expand the settings.
 
7. Uncheck the box for Use the same settings as 2.4GHz.
 
sf48096-004_hk_v3.png
 
8. Create a unique network name and password for the 5GHz WiFi.
 
sf48096-005_hk_v3.png
 
9. Click Apply to save the changes.
 
Setting your radio channel, working mode, bandwidth, AP isolation, and maximum connection number can also be done by going to WiFi > Advanced.
 

這篇支援文章有幫助嗎？

尚有其他支援問題？
重新搜尋