Overview of the Network page of the Linksys FGMM1000 and FGMM601

The Mobile Network page in the web interface of the Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router allows you to view and configure the Mobile Network and Firewall settings of your router.  To access this page, log in to the router's web interface.  For instructions, click here.  Then, go to Mobile Network.
 
User-added image

To know more, click on the options below.

Mobile Network
Firewall
 
Mobile Network
 
Feature
Description
Network Configuration

NOTE:  The Network Configuration is only available for administrator login.  If you are not the administrator of the router, contact the administrator.

The following information is shown under Network Configuration:
  • Current Network
  • Connect State
  • Carrier
 
User-added image

By default, the Automatic Registration is set to Automatic.  If you change it to Manual, the following settings will be needed:
 
User-added image

Click on Scan Visible Networks to view the networks nearby.

User-added image

User-added image
 
Mode Preference

The default and recommended values for Mode Preference are shown below.

User-added image
 
APN Profile Settings

The Access Point Name or APN Profile Settings provides the network or carrier your device uses for internet access.  By default, the switch is toggled to the ON position.

When a SIM card is inserted, the APN Profile Settings will be automatically detected.  If you require a different setting, click on Add new APN profile, enter a new profile and click Apply.

 
User-added image
 
WiFi Settings

NOTE:  This only applies to Linksys FGMM1000.

The WiFi Settings allows you to view and configure your WiFi to establish a unique and secure connection.

Toggle the switch for WiFi Settings to the ON/OFF position to enable or disable WiFi.  When in the OFF position, both WiFi bands are turned OFF.

NOTE:  If you accidentally turn OFF the WiFi, you need to connect a computer to the ethernet port on the router, log back in and turn ON the WiFi.
User-added image

User-added image

To configure your WiFi, click Edit on either 2.4G or 5G and configure your settings.
 
  • 2.4G/5G Enable – This shows whether your network is ON or OFF.
  • Network Name (SSID) – This shows the WiFi name of your network.  To update this, click here.
  • Frequency (Channel) - Auto is the default setting.
  • Bandwidth – The default and recommended value for 2.4 GHz band is 20/40 MHz, and 20/40/80 MHz for 5 GHz band.
  • Working Mode – The default value for 2.4 GHz is 802.11b/g/n/ax, and 802.11a/n/ac/ax for 5 GHz band.  This router provides backward compatibility with some legacy devices.
  • Network Visibility StatusVisible is the default value.
  • AuthenticationWPA/WPA2-Personal Mixed Mode is the default value.  See the complete options below.
 
User-added image
 
  • Password - This shows the WiFi password of your network.  To update this, click here.

After you change any settings, make sure to click Apply at the bottom of the page.
 
 
Firewall
 
Feature
Description
Firewall

The Firewall page lets you enable or disable the firewall filter function.  To save your changes, click on APPLY.
 
User-added image
 
ACL

To configure filtering, enable the IP address Filtering option on the Firewall page first.  Then in the ACL or Access Control List page, select either Blacklist to block packets or Whitelist to allow them to pass.
 
User-added image

Click on Add New Rule and enter your filtering rules.
 
User-added image
 
Click SAVE then APPLY.
 
sf318795-014_en_v2.png
 

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋