Overview of the Dashboard page of the Linksys FGMM1000 and FGMM601

The Dashboard page in the web interface of the Linksys FGMM1000 5G WiFi 6 Industrial Router and Linksys FGMM601 5G Outdoor Router provides a snapshot of your network.  To access this page, log in to the Linksys router's web interface.  For instructions, click here.
 
Linksys FGMM1000
sf318750-001_en_v2.png

Linksys FGMM601
sf318750-002_en_v2.png
 
Feature
Description
5G WiFi 6 Industrial Router / 5G Outdoor Data Unit

The status of your internet connection appears on the 5G WiFi 6 Industrial Router or 5G Outdoor Data Unit section.
 
  • WAN/LAN status
     
    • sf318750-003_en_v2.png - This means the device has internet connection.
    • sf318750-004_en_v2.png - There is no internet connection.  Make sure a SIM card is properly inserted into the SIM slot.
    • sf318750-005_en_v2.png - A WiFi or ethernet client is connected to the router.
    • sf318750-006_en_v2.png - No clients are currently connected to the router.
  • sf318750-007_en_v2.png - The SIM card is either not detected or connected.  Make sure a SIM card is properly inserted into the SIM slot.
  • Status - This displays the 4G or 5G signal status along with the carrier’s name.
     
    sf318750-008_en_v2.png
     
  • LAN IP Address - This displays the current IP address of your router.
  • WIFI - This displays the WiFi bands.  This only applies to Linksys FGMM1000.
  • Up Time - This displays how long your router has been ON since the last reboot or restart.
  • Connected Device - This displays the total number of clients currently connected to your router.
  • New firmware available - This message will only appear if there is a new firmware available.  To know how to upgrade the firmware, click here.
     
    sf318750-009_en_v2.png
Health Check

This feature is available when logged in as administrator.  Software Service can be used by an administrator for debugging.
 
sf318750-010_en_v2.png

sf318750-011_en_v2.png
Cellular Connection

The Cellular Connection section gives a summary of your current cellular connection status including the WAN information.
 
sf318750-012_en_v2.png
Serial Connection

The Serial Connection section provides you with the current serial port settings.  For instructions on how to enable the serial ports, click here.

NOTE:  This only applies to Linksys FGMM1000.

 
sf318750-013_en_v2.png
Device Info

You can view the router’s information on the Device Info section.
 
sf318750-014_en_v2.png
 

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋