Overview of the Wi-Fi Settings feature on the Linksys app

This article provides an overview of the Wi-Fi Settings feature on the Linksys app.

To configure the settings,
log in to the Linksys app, tap on the menu icon, and select Wi-Fi Settings.

 

Overview
 
SettingDescription
Wi-Fi Name and Wi-Fi PasswordDisplays your wireless network name and wireless password. Tap the field to change it. You will lose WiFi momentarily until the changes have been saved.
Advanced Wi-Fi Settings
The following settings can be configured under Advanced Wi-Fi Settings. Note that settings will vary by model.

Security Type

For Linksys routers that support Wi-Fi 7® and Wi-Fi 6e, Multiple Selection is the only option. If you need to change the security type for troubleshooting purposes, log in to your router using a desktop browser.


For all other models, you have the option to change the security type to the following:
 
  • WPA3™/WPA2™ Mixed Personal
  • WPA3 Personal Only
  • WPA2 Personal (Default)
  • Open and Enhanced Open
  • Open
 
Wi-Fi Mode

Mixed mode is the only supported mode for Linksys Mesh systems. However, options may vary depending on your router's model.

Channel Finder

Channel Finder will
scan your environment for WiFi channels that will give you the best performance. All devices will be disconnected temporarily during the scan.


DFS

If the node supports
Dynamic Frequency Selection (DFS), you can enable or disable DFS channels. The default value will vary by model.
Connect a Device with WPS
Wi-Fi Protected Setup™ (WPS) allows you to easily connect WPS-supported devices to your WiFi without manually configuring security settings.
 

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋