Overview of the Local Network Settings of your Linksys app

This article will give you an overview of the Local Network Settings feature for your Linksys Mesh WiFi system.
 
Directions

How to access the Local Network Settings
Description
 

How to access the Local Network Settings 
 
Images may vary depending on the operating system of your mobile device. An iOS device is shown in the examples below.

1.
Log in to the linksys app.
 
2. Tap the menu 
sf49744-001_en_v4.png icon at the upper-left corner of the screen.
 
3. Go to Advanced Settings then tap Local Network Settings.


sf49744-002_en_v4.png
 
You will then be taken to the Local Network Settings section.

sf49744-003_en_v4.png
 
Description
 
Router Details – This section allows you to change the LAN IP address and Subnet Mask of your Linksys Mesh system.

sf49744-004_en_v4.png
 
DHCP Server - This section allows you to change the DHCP Server settings of your Linksys Mesh system.

sf49744-005_en_v4.png
 
DNS Settings - This section allows you to change the DNS Settings of your network. Auto is selected by default. Tap on the arrow icon and select Manual to make the necessary changes.

sf49744-006_en_v4.png

If you have enabled the Safe Browsing feature, Safe Browsing will be selected.

sf49744-007_en_v4.png

If you choose to manually change the DNS numbers, this will disable the Safe Browsing feature. Tap on Continue to confirm and proceed to change the settings.

sf49744-008_en_v4.png
 

Was this support article useful?

Additional Support Questions?
Search Again